Hi
I have tried to install fresh zebra (from ports) on 4.7-RC2
have a problem - zebra turns on promiscuity mode on interface,
it is completely unacceptable when interface connected to HUB (not
switch) - router begins resend all packets.
# ifconfig fxp1
fxp1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 193.125.143.129 netmask 0xffffff00 broadcast
193.125.143.255
ether 00:a0:c9:41:a3:a3
media: Ethernet autoselect (10baseT/UTP)
status: active
# zebra -d
2002/10/04 16:33:42 ZEBRA: can't get ip6forwarding value
# ifconfig fxp1
fxp1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu
1500
inet 193.125.143.129 netmask 0xffffff00 broadcast
193.125.143.255
ether 00:a0:c9:41:a3:a3
media: Ethernet autoselect (10baseT/UTP)
status: active
Nothing special in zebra config, just installed 4.7-RC2, just upgraded
zebra.
I am not sure is it Zebra-related or FreeBSD-related problem
digging into zebra code do not show any abnormal interface flags
installed.
May be problem related to following commit:
date: 2002/08/30 14:23:38; author: sobomax; state: Exp; lines: +25 -4
MFC: user-setable promisc mode. The code is slightly diffrent (and
uglier)
than in HEAD, because we have had to preserve kernel ABI, so that
increasing
if_flags to 32 bits was not an option.
--
Vladimir B. Grebenschikov
[EMAIL PROTECTED], SWsoft, Inc.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-net" in the body of the message
