Hi Don,
> I would post the output of 'sysctl kern.polling', its likely
> some of the tuning there is insufficient.
> What do you have HZ set to (sysctl kern.clockrate)? I would
> probably have it set to ~1000.
> You will want 'machdep.cpu_idle_hlt=1'.
Thanks for quick reply. Here is the sysctl output with polling turned on.
-J
[EMAIL PROTECTED] sysctl kern.clockrate
kern.clockrate: { hz = 4000, tick = 250, tickadj = 1, profhz = 1024, stathz = 128 }
[EMAIL PROTECTED] sysctl kern.polling
kern.polling.burst: 150
kern.polling.each_burst: 5
kern.polling.burst_max: 150
kern.polling.idle_poll: 1
kern.polling.poll_in_trap: 1
kern.polling.user_frac: 50
kern.polling.reg_frac: 20
kern.polling.short_ticks: 4909
kern.polling.lost_polls: 11464
kern.polling.pending_polls: 0
kern.polling.residual_burst: 0
kern.polling.handlers: 1
kern.polling.enable: 1
kern.polling.phase: 0
kern.polling.suspect: 10249
kern.polling.stalled: 3
[EMAIL
PROTECTED] sysctl machdep.cpu_idle_hlt
machdep.cpu_idle_hlt: 1
--
James Jun TowardEX Technologies, Inc.
Technical Lead Network Design, Consulting, IT Outsourcing
[EMAIL PROTECTED] Boston-based Colocation & Bandwidth Services
cell: 1(978)-394-2867 web: http://www.towardex.com , noc: www.twdx.net
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
