Eygene Ryabinkin wrote:
Come's with fbsd 5.3 drivers, but not 6.1.
Is there an easy way out?
Use sk(4) driver. It supports DGE-530T:
Is that driver not built into the kernel? If not and all I need to do is
rebuild the kernel, ok, I can do that.
But if it's already in the kernel and the OS isn't using that driver for
that model NIC already, how would I make it do so?
-----
skc0: <D-Link DGE-530T Gigabit Ethernet> port 0xd800-0xd8ff mem
0xdfffc000-0xdfffffff irq 10 at device 7.0 on pci0
skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x1)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:0d:88:64:ad:72
$ uname -r
6.2-PRERELEASE
-----
I had no problems with this card with sk(4) driver since 5.3. (Apart
from bridge + checksum offloading problem that does not affect non-bridged
configurations and can be cured by disabling hardware-assisted checksums).
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
