On 6/22/07, Andrew Snow <[EMAIL PROTECTED]> wrote:
Hi, I have a problem with Pro/1000 cards in Freebsd, as follows:
System: Supermicro 1RU server
CPU: Intel(R) Core(TM)2 CPU 4400 @ 2.00GHz
OS: FreeBSD 6.2-STABLE (Tue May 29 03:19:28 EST 2007)
amd64 (64 bit mode, SMP kernel)
Driver: 6.4.1 kernel module (downloaded from Intel's website)
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500em0:
<Intel(R) PRO/1000 Network Connection Version - 6.4.1> port
0x5000-0x501f mem 0xe0300000-0xe031ffff irq 16 at device 0.0 on pci13
em0: Ethernet address: 00:30:48:8b:54:30
em1: <Intel(R) PRO/1000 Network Connection Version - 6.4.1> port
0x6000-0x601f mem 0xe0400000-0xe041ffff irq 17 at device 0.0 on pci14
em1: Ethernet address: 00:30:48:8b:54:31
[EMAIL PROTECTED]:0:0: class=0x020000 card=0x108c15d9 chip=0x108c8086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
device = 'PRO/1000 PM'
class = network
subclass = ethernet
[EMAIL PROTECTED]:0:0: class=0x020000 card=0x109a15d9 chip=0x109a8086 rev=0x00
hdr=0x00
vendor = 'Intel Corporation'
class = network
subclass = ethernet
em1 is connected to another Pro/1000 network card and works properly
without any problems whatsoever!
em0 is connected to a Netgear Gigabit SmartSwitch and all our cables are
Belkin CAT6 cables. We have TWO identical machines, and they both
suffer the "watchdog timeout" problem as follows:
After medium-heavy traffic, the NIC locks up completely and no traffic
passes for a long time, perhaps longer than half an hour.
Then, it recovers and prints this to syslog:
em0: watchdog timeout -- resetting
em0: link state changed to DOWN
em0: link state changed to UP
The problem was much worse with the supplied drivers of FreeBSD 6.2, any
large packets would trigger it, but upgrading to 6.4.1 helped alot.
The problem still happens with SMP completely disabled. The only
workaround which is completely successful for me so far is to disable
gigabit and use 100baseTX instead.
The netgear switch is configured for VLANs but VLAN outbound tagging is
not enabled for this switch port and the em0 interface is not configured
for VLANs.
Any ideas?
Bit by the 82573 eeprom MANC setting problem :(
If you search thru the email archives you will find that
I have posted a DOS patcher that fixes the problem.
Search on 82573, if you have a problem let me know.
What happens is that the eeprom mis-programs the
MANC (management controller) register so it
gobbles up packets rather than hand up to the host
OS.
The patcher should solve your problems, if not you
know who to call :)
Cheers,
Jack
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
