On 5/11/09, Gustau Perez <gpe...@entel.upc.edu> wrote: > > Hi, > > I'm using a Broadcom BCM4312 with i386 FreeBSD-8.0 updated May 08 > 2009. Ports up to date. Using net/bwi-firmware-kmod. Loading > first bwi_v3_ucode and then if_bwi. > > When starting the supplicant, it associates fine and it works for a > period of time. From time to time I start to lose signal, I'm my log I > can see the following message : > > May 11 08:42:51 gusiport kernel: bwi0: firmware rev 0x0127, > patch level 0x000e > May 11 08:42:51 gusiport kernel: bwi0: bwi_intr: intr PHY TX > error > > Many of those messages per second. This is the first problem with > if_bwi. It forces me to restart by hand the wlan1 device associated to > bwi0. And here comes the freeze (the second problem I encountered). If I > try restarting like this : > > /etc/rc.d/netif stop wlan1 && /etc/rc.d/netif start wlan1 > > it works (until the PHY TX error appears againg). If I try like : > > /etc/rc.d/netif restart > > or if I try : > > /etc/rc.d/netif stop bwi0 > > the machine freezes. If i try to kldunload the module while in use > (if there's a wlan device created) the machine freezes too. It can be > unloaded only if there is not any wlan associated to the bwi device.
Is this mini-pci card? (pciconf -lv) -- Paul _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
