On 04.12.2010 15:08, Jack Vogel wrote:
> This isn't some simple 'go change this line or parameter',
> there were some problematic issues that my Linux coworkers
> faced, I have to go look into it before I even decide...
>
> so...patience friend.
For igb(4) the change seems pretty short. At least, it works
for my 82576-based dual-port copper card.
--- if_igb.h.orig 2010-12-06 12:27:54.000000000 +0600
+++ if_igb.h 2010-12-06 12:29:47.000000000 +0600
@@ -450,6 +450,8 @@
#endif
void *stats;
+ /* Bring link down when interface goes down */
+ int down_disables_link;
};
/*
******************************************************************************
--- if_igb.c.orig 2010-11-30 11:14:42.000000000 +0600
+++ if_igb.c 2010-12-06 12:37:10.000000000 +0600
@@ -432,6 +432,13 @@
OID_AUTO, "enable_aim", CTLTYPE_INT|CTLFLAG_RW,
&igb_enable_aim, 1, "Interrupt Moderation");
+ adapter->down_disables_link = 0;
+ SYSCTL_ADD_INT(device_get_sysctl_ctx(dev),
+ SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
+ OID_AUTO, "down_disables_link", CTLTYPE_INT|CTLFLAG_RW,
+ &adapter->down_disables_link, adapter->down_disables_link,
+ "Bring link down when interface goes down");
+
callout_init_mtx(&adapter->timer, &adapter->core_mtx, 0);
/* Determine hardware and mac info */
@@ -2070,6 +2077,13 @@
e1000_led_off(&adapter->hw);
e1000_cleanup_led(&adapter->hw);
+
+ if(adapter->down_disables_link) {
+ e1000_power_down_phy(&adapter->hw);
+ igb_handle_link(adapter, 0);
+ /* Reset the phy next time init gets called */
+ adapter->hw.phy.reset_disable = FALSE;
+ }
}
However, similar patch applied to em(4) does not work
for my on-board 82574L-based cards: e1000_power_down_phy()
thanslates to e1000_power_down_phy_copper_82571() that does nothing
because mac->ops.check_mng_mode(hw) returns true value
and, therefore, e1000_power_down_phy_copper(hw) is not even called.
Still trying to find a way...
Eugene Grosbein
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
