On 19.12.2010 00:35, Eugene Grosbein wrote: > Hi! > > I've loaded router using two lagg interfaces in LACP mode. > lagg0 has IP address and two ports (em0 and em1) and carry untagged frames. > lagg1 has no IP address and has two ports (igb0 and igb1) and carry > about 1000 dot-q vlans with lots of hosts in each vlan. > > For lagg1, lagg distributes outgoing traffic over two ports just fine. > For lagg0 (untagged ethernet segment with only 2 MAC addresses) > less than 0.07% (54Mbit/s max) of traffic goes to em0
Here 7%, not 0.07%. And I forgot to note it's 8.2-PRERELEASE. > and over 99.92% goes to em1, that's bad. > > That's general traffic of several thousands of customers surfing the web, > using torrents etc. I've glanced over lagg/lacp sources if src/sys/net/ > and found nothing suspicious, it should extract and use srcIP/dstIP for hash. > > How do I debug this problem? _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"