On Mon, 14 Mar 2011, Ryan Coleman wrote:
> I've searched high and low and have no idea where to start to get
> this thing going... It's recognizing it now but I am not finding any
> details online (like people who have shared their full configuration
> details) on how they got the VirginMobile version going. In fact,
> I've found so few pieces I am not sure how I might piece it all
> together. I've tried to hack a VZW one through but no luck.
>
> Thanks again. I'm working, also, on getting VPN to work should this
> not be settled by the time the machine needs to be installed.
Ryan, I can't comment on your gadget, and though I used dialup ppp for
about 10 years, it's been a while and some things have likely changed -
but you want to be looking at ppp(8), /etc/ppp/ppp.conf and the example
files referenced there in /usr/share/examples/ppp/ esp. ppp.conf.sample
for the correct formats, particularly of the dial string.
> Current ppp.conf details:
> virgin:
> > set device /dev/cuau0
> > set speed 230400
> > set phone "#99*"
> > set authname ""
> > set authkey ""
> > set server /var/run/ppp.pid "" 0177
I'd assume that's ok, but for the first two error messages below .. I'll
transplant them to here:
> > Mar 15 04:26:50 camserve kernel: tun2: link state changed to UP
> > Mar 15 04:26:50 camserve ppp[8111]: tun2: Warning: Local: bind: Address
> > already in use
I suspect that means /dev/cuau0 is already in use.
> > Mar 15 04:26:50 camserve ppp[8111]: tun2: Warning: set server: Failed 2
See 'set server' in ppp(8). It should specify a local tcp port or local
domain socket. A pidfile seems most unsuitable for that, it's a file
not a socket and most likely used by /etc/rc.d/ppp. Here I used:
set server 3000 mypassword
so 'pppctl 3000' can be used to control or interrogate ppp. pppctl(8)
uses an example local domain socket of:
set server /var/run/internet "" 0177
> > set dial "ABORT BUSY ABORT NO\sCARRIER TIMEOUT 5 "
That closing double quote ends your dial string, so the below are then
all interpreted as (invalid) commands to ppp instead.
> > AT OK
> > ATZ0 OK
> > ATQ0 OK
> > ATV1 OK
> > ATE1 OK
> > AT+EFCS=2 OK
> > AT&V OK
> > #\dATDT\T TIMEOUT 30 CONNECT"
Your dial string needs to be one single string, and you can't include
any #comments within it. Again transplanting some of the error messages:
> > Mar 15 04:26:50 camserve ppp[8111]: tun2: Warning: AT: Invalid command
> > Mar 15 04:26:50 camserve ppp[8111]: tun2: Warning: AT: Failed 1
> > Mar 15 04:26:50 camserve ppp[8111]: tun2: Warning: ATZ0: Invalid command
> > Mar 15 04:26:50 camserve ppp[8111]: tun2: Warning: ATZ0: Failed 1
> > Mar 15 04:26:50 camserve ppp[8111]: tun2: Warning: ATQ0: Invalid command
> > [..]
Here's one of my old dial strings in the correct format. For a dialup
modem so won't be at all suitable, but I'm pointing out the format:
set dial "ABORT BUSY ABORT NO\\sCARRIER ABORT NO\\sANSWER TIMEOUT 10 \
\"\" ATZ OK-ATZ-OK ATE0Q0L1S7=50W3+MS=V34B,1,24000,33600 OK \
\\dATDT\\T TIMEOUT 60 CONNECT \\c \\n"
> > set login
> > set redial 3 0
> > set timeout 0
> > set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
> > add! default HISADDR
> > enable dns
> > disable ipv6cp
> > enable lqr
> > accept lqr
> > set cd off
Maybe :) I won't comment on any of the rest as I don't know this kit or
anything about its requirements.
HTH, Ian
_______________________________________________
freebsd-net@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
