This was a special 'skew' of the 82599 done for Dell, and as they did not request FreeBSD it did not get called out in our internal development procedures, however you are the second person in a fairly short time who has requested it, and after checking things out there appears to be no reason not to add the ID, so that will be coming shortly.
Regards, Jack On Sat, Jun 9, 2012 at 10:19 PM, Nikolay Denev <nde...@gmail.com> wrote: > Hello Jack, > > It seems the following controller is not yet supported by ixgbe(4) : > > none4@pci0:3:0:0: class=0x020000 card=0x7b118086 chip=0x154d8086 > rev=0x01 hdr=0x00 > vendor = 'Intel Corporation' > device = '82599EB 10-Gigabit SFP+ Network Connection' > class = network > subclass = ethernet > none5@pci0:3:0:1: class=0x020000 card=0x7b118086 chip=0x154d8086 > rev=0x01 hdr=0x00 > vendor = 'Intel Corporation' > device = '82599EB 10-Gigabit SFP+ Network Connection' > class = network > subclass = ethernet > > Any ideas on how to get that working? Is it just a matter of adding the > PCI ID to the source? (I'll try that now) or are > there any other differences. > > Regards, > Nikolay _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
