On Wed, Sep 26, 2012 at 04:12:19PM +0300, Vladimir Vladimir wrote: > Hi all, > > I've got an issue with new mother board ASUS P8Z77-M PRO. > > My FreeBSD 9.0-RELEASE can't set up Network interface for integrated NIC > Realtek 8168/81111. > > I have tried FreeBSD-8.2, and FreeBSD-9.0 > I' downloaded new distributions from freebsd.org and tried boot from them > but result the same. FreeBSD couldn't setup re0 interface. > > in the dmesg output : > > re0: <RealTek 8168/8111 B/C/CP/D/DP/E PCIe Gigabit Ethernet> port > 0xd000-0xd0ff mem 0xdc104000-0xdc104fff,0xdc100000-0xdc103fff irq 17 at > device 0.0 on pci2 > re0: Using 1 MSI-X message > re0: turning off MSI enable bit. > re0: Chip rev. 0x2c800000 > re0: MAC rev. 0x00000000 > > so looks like FreeBSD detected NIC, but ifconfig shows loop interface only
There had been lots of re(4) changes since 9.0-RELEASE. Try 8.3-RELEASE or 9.1-RC1. > > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 > options=3<RXCSUM,TXCSUM> > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0xa > inet 127.0.0.1 netmask 0xff000000 > nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> > > if i try command > > ifconfig re0 create > ifconfig: SIOCIFCREATE2: Invalid argument > > at the same time Ubuntu works perfect on this mother board, so there aren't > any hardware issues > > In the official ASUS documentation for motherboard ASUS P8Z77-M PRO it's got > NIC Realtek® 8111F, 1 x Gigabit LAN Controller(s) > http://www.asus.ua/Motherboards/Intel_Socket_1155/P8Z77M_PRO/#specifications > > May be re(4) driver not updated for this mother board yet?. > http://www.freebsd.org/cgi/man.cgi?query=re&apropos=0&sektion=4&manpath=FreeBSD+9.0-stable&arch=default&format=html > > If anybody faced of such issue., let me know. > > Thanks Vlad. _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "[email protected]"
