Using Intel 82573 nic built on my pdsbm-ln2 1U server and only one port will work. And my WIFI PCI card and dual legacy intel NIC PCI will cause system to HALT on boot. If I pull those cards out the system will boot but only one port will work that is built on the motherboard. If I disable both with jumpers then I can use a PCI card in the system.
Refer to all the notes I did here https://forum.pfsense.org/index.php?topic=84909.0 Here is my dmesg log http://pastebin.com/tW9Qe3g2 Code: em0: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0x4000-0x401f irq 16 at device 0.0 on pci2 pcib0: allocated type 3 (0xd0200000-0xd02fffff) for rid 20 of pcib2 pcib2: allocated initial memory window of 0xd0200000-0xd02fffff pcib2: allocated memory range (0xd0200000-0xd021ffff) for rid 10 of em0 em0: Lazy allocation of 0x20000 bytes rid 0x10 type 3 at 0xd0200000 em0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 51 em0: using IRQ 256 for MSI em0: Using an MSI interrupt em0: Setup of Shared code failed device_attach: em0 attach returned 6 -- View this message in context: http://freebsd.1045724.n5.nabble.com/Anyone-seen-this-error-on-em-tp4016166p5978277.html Sent from the freebsd-net mailing list archive at Nabble.com. _______________________________________________ freebsd-net@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
