On Fri, Jun 02, 2017 at 09:56:28AM +0100, Matthew Seaman wrote: > On 06/02/17 02:49, Karl Denninger wrote: > > Is there a dynamic DNS update method associated with Ipv6's address > > assignment system? Since the assignment is "stateless" it obviously > > (and does, in my experience!) move. I can deal with it via a couple of > > shell scripts, and there are only a couple of hosts where it matters, > > but this would dramatically simplify the IPv4 gameplaying that's > > necessary to have something behind a gateway router while on a "globally > > visible", but possibly changing "at whim", IpV6 address. > > Assuming that you always get the same /64 assigned to your gateway, then > the address SLAAC assigns to your server will be constant so long as > you're on the same hardware, since the SLAAC address is generated from > the network prefix and the MAC address of the NIC. In that case, it > often suffices to update the DNS manually.
Only if ipv6_privacy="YES" is not set. Regards, Gary > > If that doesn't work for you, then while there isn't a DNS update > mechanism built into SLAAC, there is one in DHCP6. That relies on the > dhcp server being able to make dynamic DNS updates via nsupdate(1). Of > course, if you have all the keys etc. set up to be able to use > nsupdate(1) you could fairly easily add a 'dns-update' rc script on your > host to push the hosts' IPv6 address into the DNS. > > The other fairly common approach would be to use a network configuration > system like ansible or puppet that can gather facts about a machine > (such as the IPv6 address) write them into a DNS zone file. > > Cheers, > > Matthew > _______________________________________________ freebsd-net@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-net To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
