Am 2017-10-05 00:48, schrieb Dustin Marquess:
You probably want:
laggproto loadbalance lagghash l3,l4
Instead of:
laggproto lacp
It also looks like your switch ports are configured for Jumbo packets
and on the FreeBSD side you're not increasing the mtu.
Hi,
thanks for your advice.
Hower, when I configure it that way, I don't get any traffic at all.
Even with running tcpdump.
For reference, this is the linux configuration that apparently works (on
another host).
auto lo
iface lo inet loopback
auto p1p1
iface p1p1 inet manual
bond-master bond0
auto p1p2
iface p1p2 inet manual
bond-master bond0
auto bond0
iface bond0 inet manual
bond-slaves none
bond-mode 4
bond-miimon 100
bond-updelay 200
bond-downdelay 200
bond-lacp-rate 1
auto bond0.2004
iface bond0.2004 inet manual
auto br2004
iface br2004 inet static
address 10.1.4.190
netmask 255.255.255.192
gateway 10.1.4.129
dns-nameservers 192.168.225.67 192.168.225.68 192.168.225.98
dns-search varios.domains.
bridge-ports bond0.2004
bridge-stp off
bridge_maxwait 0
up route add -net 10.1.4.128/26 gw 10.1.4.129
auto bond0.2002
iface bond0.2002 inet manual
auto br2002
iface br2002 inet manual
bridge-ports bond0.2002
bridge-stp off
bridge_maxwait 0
auto bond0.2002
iface bond0.2002 inet manual
auto br2007
iface br2007 inet manual
bridge-ports bond0.2007
bridge-stp off
bridge_maxwait 0
Best Regards,
Rainer
_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "[email protected]"
