Aaron, Thanks for your reply. Here is some output from some dd's on the disk that I'm reading/writing to.
> dd if=/dev/zero of=testfile count=1000000;dd if=testfile of=/dev/null 1000000+0 records in 1000000+0 records out 512000000 bytes transferred in 27.951769 secs (18317267 bytes/sec) 1000000+0 records in 1000000+0 records out 512000000 bytes transferred in 16.864945 secs (30358830 bytes/sec) > dd if=/dev/zero of=testfile count=1000000 ; dd if=testfile of=/dev/null 1000000+0 records in 1000000+0 records out 512000000 bytes transferred in 28.492921 secs (17969376 bytes/sec) 1000000+0 records in 1000000+0 records out 512000000 bytes transferred in 16.605797 secs (30832607 bytes/sec) Am I reading right, the max network transfer rate from this disk will be between 143Mbit and 246Mbit/sec? Is there a way to determine if there is an IRQ conflict? How do you find out what IRQ's are currently used by the system? Sally Thu, Mar 22, 2007 at 04:31:16PM -0700, Aaron Seelye wrote: > If it's platform agnostic, I'd start looking for IRQ conflicts. It would > seems that your test all involve disk io, check that first and narrow down > that it's a network or disk problem. You may have a bum raid card, irq > conflict on the network card, any number of things. > > -Aaron > ----- Original Message ----- > From: "Sally Janghos" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Thursday, March 22, 2007 10:16 AM > Subject: Where to troubleshoot Intel PRO/1000 performance problems? > > > >I'm looking for some suggestions on where to start troubleshooting > >performance issues on a Intel PRO 1000 card. > > > >It's installed in a box with the following configuration: > >FreeBSD 6.1 > >AMD Athlon(tm) XP 2100+ (1741.42-MHz 686-class CPU) > >Dell CERC SATA RAID 2 > > > >The file transfer(ftp/smb/scp) speeds from/to this machine do not appear > >to go above 10Mb. The other machine > >doing the transfers has similar specs(same Ethernet Card) but is a Windows > >XP box. I've tried replacing the switch with > >a crossover cable between the machines and the same speed persists. Any > >suggestions on where to start and what tools > >should I use to do the benchmarks? > > > >Thanks, > > Sally > >_______________________________________________ > >[email protected] mailing list > >http://lists.freebsd.org/mailman/listinfo/freebsd-performance > >To unsubscribe, send any mail to > >"[EMAIL PROTECTED]" > > > > > >-- > >No virus found in this incoming message. > >Checked by AVG Free Edition. > >Version: 7.5.446 / Virus Database: 268.18.17/730 - Release Date: 3/22/2007 > >7:44 AM > > > > > _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-performance To unsubscribe, send any mail to "[EMAIL PROTECTED]"
