Heloo bill
Can you point me what's wrong in my configuration. As I want to graph total
bandwidth and each client individual bandwidth. But as there is any traffic
in root queue I can't view the actuall total traffic of all clients.
Can you guide me what's wrong here?
From: "Bill Marquette" <[EMAIL PROTECTED]>
To: "Gloomy Group" <[EMAIL PROTECTED]>
CC: [email protected]
Subject: Re: pf altq not showing root traffic
Date: Sun, 29 Oct 2006 09:06:35 -0500
On 10/29/06, Gloomy Group <[EMAIL PROTECTED]> wrote:
Hi,
I have setup pf and altq traffic shapping on freebsd 6.1. my configuration
is as follows;
ext_if="rl0"
int_if="rl1"
table <client1> {192.168.0.1/27}
scrub in all
altq on $int_if hfsc bandwidth 912Kb queue{client1_down, default_down}
altq on $ext_if hfsc bandwidth 256Kb queue{client1_up, default_up }
# define queue for download
queue default_down bandwidth 32Kb hfsc (realtime 32Kb upperlimit 32Kb
default)
queue default_up bandwidth 32Kb hfsc (realtime 32Kb upperlimit 32Kb
default)
queue client1_down bandwidth 64Kb hfsc (realtime 64Kb upperlimit 64Kb)
# define queue for upload
queue client1_up bandwidth 64Kb hfsc (realtime 64Kb upperlimit 64Kb)
pass out quick on $int_if from any to <client1> queue client1_down label
client1_down
pass out quick on ext_if from <client1> to any queue client1_up label
client1_up
---------------------------------------------------------------------------------------------------
Shapping is working fine, except root_rl0 and root_rl1 traffic is not
shown.
What's wrong with my confiugration?
below is the output of "pfctl -s queue -v" command
bw-shaper# pfctl -s queue -v
queue root_rl1 bandwidth 912Kb priority 0 {default_down, client1_down}
[ pkts: 0 bytes: 0 dropped pkts: 0 bytes:
0
]
[ qlength: 0/ 50 ]
queue default_down bandwidth 32Kb hfsc( default realtime 32Kb upperlimit
32Kb )
[ pkts: 1078 bytes: 108628 dropped pkts: 0 bytes:
0
]
[ qlength: 0/ 50 ]
queue client1_down bandwidth 64Kb hfsc( realtime 64Kb upperlimit 64Kb )
[ pkts: 1625 bytes: 1395472 dropped pkts: 0 bytes:
0
]
[ qlength: 0/ 50 ]
queue root_rl0 bandwidth 256Kb priority 0 {default_up, client1_up}
[ pkts: 0 bytes: 0 dropped pkts: 0 bytes:
0
]
[ qlength: 0/ 50 ]
queue default_up bandwidth 32Kb hfsc( default realtime 32Kb upperlimit
32Kb
)
[ pkts: 422 bytes: 30116 dropped pkts: 0 bytes:
0
]
[ qlength: 0/ 50 ]
queue client1_up bandwidth 64Kb hfsc( realtime 64Kb upperlimit 64Kb )
[ pkts: 1586 bytes: 383594 dropped pkts: 0 bytes:
0
]
[ qlength: 0/ 50 ]
Ohcarol.
I don't believe pf will show the cumulative child queue traffic in the
parent queues (it would be nice to have the option). I don't see
anywhere where you assigned traffic to the root queues (not even sure
if you can) and the default queues are both in your child queues.
From what I've seen, I don't believe you have anything to be concerned
about.
--Bill
_________________________________________________________________
Use your PC to make calls at very low rates
https://voiceoam.pcs.v2s.live.com/partnerredirect.aspx
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-pf
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
