On Jul 17, 2006, at 8:04 PM, John Merryweather Cooper wrote:
Anthony Agelastos wrote:
On Jul 16, 2006, at 11:19 PM, John Merryweather Cooper wrote:
Anthony Agelastos wrote:
On Jul 16, 2006, at 10:08 PM, John Merryweather Cooper wrote:
Anthony Agelastos wrote:
On Jul 16, 2006, at 3:19 PM, Doug Barton wrote:
For future reference, please don't post to both -ports and -
questions.
Thank you for this clarification.
Anthony Agelastos wrote:
Does anyone out there have network printing working with
hpijs/hplip and
CUPS 1.2.0?
Yes. You need to follow the instructions at
file:///usr/local/share/doc/hplip-0.9.11/install/step4/cups/
net.html
I do not think I explained my situation very well. This
printer (hp LaserJet 1160Le) is connected directly to my
FreeBSD server via USB. If I print something logged on the
server (via lp for instance), it prints. I wish to print to
this printer from all of the computers on my LAN. When I try
to print something from one of these computers, that is when
it bombs and displays the foomatic-rip error message (foomatic-
rip failed).
The directions on that sheet appear to be if I wanted to print
to this network printer that wasn't directly connected to the
FreeBSD server. Am I mistaken about this? Also, there is no
button on the printer that will print such a page, so I would
have to figure out how to find this IP address by other means.
I cannot see how to find it in the CUPS web interface. I
assume CUPS issues it an IP address.
The error_log that I have posted on previous threads is
attached to this email (the successful print jobs were done
locally while the error occurred when I printed to the printer
from my MacBook Pro). Does anyone have any suggestions? I
should note that prior to the CUPS upgrade to 1.2.0 (and the
recent gnutls update), my setup was working (I was able to
print from the server itself as well as all of the rest of the
computers on my LAN). I have rebuilt all packages several
times (except for the OS).
On my MacBook Pro, when I go to the CUPS web interface, I see
the following for the printer:
[EMAIL PROTECTED] HP LaserJet 1160 Foomatic/
hpijs (recommended) Description: hp LaserJet 1160Le
Location: Den
Printer State: idle, accepting jobs.
192.168.0.3 is the IP address of my FreeBSD server on my LAN.
It looks as if Mac OS X 10.4.7 runs CUPS 1.1.23, but I could
be mistaken. It has found the printer through Bonjour
(zeroconf I believe is another name for it), so I didn't have
to do any configuring. Could there be an incompatibility
within these versions of CUPS? I have found the following page
which lists several issues and talks about how CUPS 1.2.0 is
broken in several places. Could one of these be the issue?
http://www.bsdforums.org/forums/showthread.php?t=42391
On a sidenote, I was having difficulties installing hpijs
when hplip was
already installed
I'm working on that.
Thank you for your assistance on this.
Doug
-- This .signature sanitized for your protection
-----------------------------------------------------------------
-------
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-
[EMAIL PROTECTED]"
You need to restart CUPS when the printer "attaches" via USB or
else CUPS won't know about the USB port and you'll get this
error every time.
I just did a /usr/local/etc/rc.d/cupsd restart and then printed
something from my laptop. Same error.
dell# lpstat -t
scheduler is running
no system default destination
device for Create_PDF: cups-pdf:/
device for hp_LaserJet_1160Le: /dev/ulpt0
Create_PDF accepting requests since Sun Jun 25 11:27:52 2006
hp_LaserJet_1160Le accepting requests since Sun Jul 16 22:36:15
2006
printer Create_PDF is idle. enabled since Sun Jun 25 11:27:52 2006
printer hp_LaserJet_1160Le is idle. enabled since Sun Jul 16
22:36:15 2006
/usr/local/libexec/cups/filter/foomatic-rip failed
hp_LaserJet_1160Le-30 iqgrande 7168 Sun Jul 16
22:36:02 2006
jmc
What are the permissions/ownership on /dev/ulpt0?
jmc
%ls -l /dev/ulpt0
crw-rw---- 1 root cups 0, 68 Jul 16 22:36 /dev/ulpt0
Same as I have. CUPS works for me if I restart it after the USB
printer attaches. If I don't restart it, then I get the same error
you're reporting.
jmc
I wonder what the difference is between our machines. What printer do
you use (and drivers)?
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
