Hi folks, sorry if this has been covered before (please direct me to the thread if it has), but I'm really struggling. cdrecord refuses to work properly with hal and dbus enabled. It locks the whole system tight with messages like these:
Dec 25 22:26:17 laptop64 kernel: acd0: WARNING - TEST_UNIT_READY taskqueue timeout - completing request directly Dec 25 22:26:23 laptop64 kernel: acd0: WARNING - TEST_UNIT_READY freeing taskqueue zombie request Dec 25 22:28:17 laptop64 kernel: acd0: WARNING - PREVENT_ALLOW taskqueue timeout - completing request directly Dec 25 22:28:17 laptop64 kernel: acd0: WARNING - PREVENT_ALLOW freeing taskqueue zombie request All I can do is hard reset the system. System specifics: laptop64 ~ $ uname -a FreeBSD laptop64 6.1-RELEASE-p11 FreeBSD 6.1-RELEASE-p11 #5: Tue Dec 26 10:08:56 GMT 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/LAPTOP64 i386 laptop64 ~ $ lshal | most Dumping 54 device(s) from the Global Device List: ------------------------------------------------- [...] udi = '/org/freedesktop/Hal/devices/ide_host_0' ide_host.number = 0 (0x0) (int) info.bus = 'ide_host' (string) freebsd.unit = 0 (0x0) (int) freebsd.driver = 'ata' (string) info.product = 'ATA channel 0' (string) info.udi = '/org/freedesktop/Hal/devices/ide_host_0' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4376' (string) udi = '/org/freedesktop/Hal/devices/ide_host_0_scsi_host' info.udi = '/org/freedesktop/Hal/devices/ide_host_0_scsi_host' (string) info.product = 'SCSI Host Adapter' (string) scsi_host.host = 0 (0x0) (int) info.bus = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/ide_host_0' (string) [...] udi = '/org/freedesktop/Hal/devices/ide_host_1' ide_host.number = 1 (0x1) (int) info.bus = 'ide_host' (string) freebsd.unit = 1 (0x1) (int) freebsd.driver = 'ata' (string) info.product = 'ATA channel 1' (string) info.udi = '/org/freedesktop/Hal/devices/ide_host_1' (string) info.parent = '/org/freedesktop/Hal/devices/pci_1002_4376' (string) udi = '/org/freedesktop/Hal/devices/ide_host_1_scsi_host' info.udi = '/org/freedesktop/Hal/devices/ide_host_1_scsi_host' (string) info.product = 'SCSI Host Adapter' (string) scsi_host.host = 1 (0x1) (int) info.bus = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/ide_host_1' (string) udi = '/org/freedesktop/Hal/devices/ide_host_1_scsi_host_scsi_device_lun0' info.udi = '/org/freedesktop/Hal/devices/ide_host_1_scsi_host_scsi_device_lun0 ' (string) scsi.type = 'cdrom' (string) scsi.model = 'DVD-RW GWA-4082N' (string) scsi.vendor = 'HL-DT-ST' (string) info.vendor = 'HL-DT-ST' (string) info.product = 'SCSI Device' (string) scsi.lun = 0 (0x0) (int) scsi.target = 0 (0x0) (int) scsi.bus = 1 (0x1) (int) scsi.host = 1 (0x1) (int) info.bus = 'scsi' (string) info.parent = '/org/freedesktop/Hal/devices/ide_host_1_scsi_host' (string) udi = '/org/freedesktop/Hal/devices/temp/48' info.udi = '/org/freedesktop/Hal/devices/ignored-device' (string) info.ignore = true (bool) storage.lun = 0 (0x0) (int) storage.firmware_revision = 'CB03' (string) info.product = 'Ignored Device' (string) info.vendor = 'HL-DT-ST' (string) storage.cdrom.write_speed = 0 (0x0) (int) storage.cdrom.read_speed = 0 (0x0) (int) storage.cdrom.support_media_changed = false (bool) storage.cdrom.hddvdrw = false (bool) storage.cdrom.hddvdr = false (bool) storage.cdrom.hddvd = false (bool) storage.cdrom.bdre = false (bool) storage.cdrom.bdr = false (bool) storage.cdrom.bd = false (bool) storage.cdrom.dvdplusrwdl = false (bool) storage.cdrom.dvdplusrdl = false (bool) storage.cdrom.dvdplusrw = false (bool) storage.cdrom.dvdplusr = false (bool) storage.cdrom.dvdram = false (bool) storage.cdrom.dvdrw = false (bool) storage.cdrom.dvdr = false (bool) storage.cdrom.dvd = false (bool) storage.cdrom.cdrw = false (bool) storage.cdrom.cdr = false (bool) storage.vendor = 'HL-DT-ST' (string) storage.model = 'DVD-RW GWA-4082N' (string) storage.physical_device = '/org/freedesktop/Hal/devices/ide_host_1_scsi_host_s csi_device_lun0' (string) storage.no_partitions_hint = true (bool) storage.automount_enabled_hint = true (bool) storage.media_check_enabled = true (bool) storage.hotpluggable = false (bool) storage.requires_eject = true (bool) storage.removable = true (bool) storage.drive_type = 'cdrom' (string) storage.bus = 'scsi' (string) block.minor = 83 (0x53) (int) block.major = 0 (0x0) (int) block.device = '/dev/cd0' (string) info.bus = 'block' (string) freebsd.unit = 0 (0x0) (int) freebsd.driver = 'cd' (string) info.parent = '/org/freedesktop/Hal/devices/ide_host_1_scsi_host_scsi_device_l un0' (string) laptop64 ~ $ ls /var/db/pkg | grep cdrtools cdrtools-2.01_5 laptop64 ~ $ ls /var/db/pkg | grep hal- hal-0.5.8.20061217 Burncd works perfectly and cdrecord works if I disable dbus, polkit and hal. This is across all my systems, so it's not limited to this laptop. if it matters, I've used both K3B and cdrecord from the command line with the same results. Any ideas/things I've missed? I am in the operator group and cdrecord is suid and owned by root. Both acd0 and cd0 are not in fstab and are read/write for my user, pass and xpt are both read/write and hal works fine with USB pen drives and CDs. It is only cdrecord that causes problems. I have recompiled cdrtools after enabling the hardware abstraction layer just in case, but no change. Any help would be appreciated. -- Matt Dawson. [EMAIL PROTECTED] MTD15-RIPE OpenNIC M_D9 MD51-6BONE _______________________________________________ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "[EMAIL PROTECTED]"