Gentlemen, www.turbinepowerinternational.com We have just purchased a large quantity of NEW General Electric LM Gas Turbine equipment. We will sell any piece, any group, or all if the price is there. 98% of everything is new surplus from the S&S sale to GE. We are selling everything at 50% of list for new and 35% of list for used. Some items we have to guess at and others we will listen to any reasonable offer. This is not a fire sale and everything is sold as is where is with no warranty. We want to move these parts and recover our investment money. I will set the price immediately and will sell to the 1st person with $$ on the table. All agreed on sale items will be shipped via FedEx using your number or can be picked up in person after the monies are EFT (Electronic Funds Transferred). We have a very large inventory and have access to much more, so if you don't see it on my lists, ask. We also have photos of most items, so ask to see a photo of something you're interested in please ask or visit our web site at www.turbinepowerinternational.com . We have one (1) Brand New GE LM2500 Exhaust Collector complete for $75,000.00 USD available for immediate sale F.O.B. Houston. It is absolutely BRAND NEW and never a bolt attached to anything. www.turbinepowerinternational.com ===================== EQUIPMENT LISTING HERE ======================== We have available for sale six (6) LNG Gas Compressors for Combined Cycle Power Plant.All Equipment is Brand New and Never Used.These compressors are warehoused and protected from the elements.They will be sold “as is where is” condition.F.O.B. Asian Port.For quick disposal basis, we offer very special prices as follows: Price is $880,000.00 USD for all six (6) sets of motors, compressor modules, high pressure valves, cables, 2 sets of nitrogen generators and all other auxiliary equipment.Price of $160,000.00 USD each electric motor and compressor module package. www.turbinepowerinternational.com ===================== EQUIPMENT LISTING HERE ======================== (4) S & S Dual Heat Exchangers used on the LM 2500 for Engine and Electric Generator Oil Cooling. Price is $25,000.00 each or $80,000.00 for all Four (4). All Stainless Steel Tubes, units need to be cleaned and repainted. Sold “as is, where is” without warranty. F.O.B. Houston, Texas.GEA Rainey Corp. MAWP 150 psig @ 300’F, MDMT -20’F @ 100’F, Test Pressure 225 psig. www.turbinepowerinternational.com ===================== EQUIPMENT LISTING HERE ======================== Three (3) Brand New IMO Pump Division (Monroe, N.C.) vertical main lube oil pump skids by IMO, for the packages of LM2500 and LM6000 for sale that are still in the crates with preservative still on them. Here are all the numbers and I believe one is for the LM2500 and the other two identical are for the LM6000. (Qty. 1) Type AG3DKHX-312P/254, S/N 805179-01 (Qty. 2) Type AG3DKH-400/254 These units do not have any motors included as the manufacture doesn't know the Hz nor voltage customers need. Price is $12,000.00 USD for the smaller unit and $15,000.00 USD/each for the slightly larger units. $35,000 for all three. FOB Miami, immediately available. www.turbinepowerinternational.com ===================== EQUIPMENT LISTING HERE ======================== Complete Higgott-Kane Anti-Icing Systems For (3) LM6000’s All 3 Anti-Icing Systems are 2001-2002, NEW never installed. Complete w/ manuals assembly drawings, etc. Our price for all 3: $300,000.00 USD. FOB Storage Site. Designed for LM6000 systems. For more pictures and technical specifications and or inspection please contact us. www.turbinepowerinternational.com ===================== EQUIPMENT LISTING HERE ======================== We have 2 each Trane Chillers Brand New, Never installed available for immediate sale. FOB Houston, Texas. 50Hz. 1060 Tons each Equipment comes complete with manuals. Price for both units $200,000.00 USD. $125,000 each or $200,000 for both These units are being sold “as is, where is”. Additional pictures are supplied upon request. www.turbinepowerinternational.com ===================== EQUIPMENT LISTING HERE ======================== I have nine (9) new Aero Vent Hartzell EG Enclosure Fans for the LM2500 50/60 Hz. packages with the following specs for immediate sale that are stored in Houston for $10,000/each, or if someone is interested in all nine I would make a packaged price of $75,000 for the 9, #377A6994P0001, Fan #C-31386, CE-50, TCF 30B731-VABD-2080-25HP/ABB, O.D. 34", I.D. 29.5", F/T/F height 36", 12,000 cfms. FOB Miami. www.turbinepowerinternational.com ===================== EQUIPMENT LISTING HERE ======================== (3) Large Flat Engine Junction Boxes Price: $15,000.00 USD each or ALL (3) for $40,000.00 USD These Junction Boxes where removed from Aero Turbine Enclosures (LM6000 I'm told), Which still have all the Pressure and Temperature Transmitters, Switches, And Woodward Link Net Modules still installed. Selling “as is, where is” F.O.B. Houston, Texas Ideal for the LM2500, LM5000, M6000 or any other units with outside Junction Box. www.turbinepowerinternational.com ===================== EQUIPMENT LISTING HERE ======================== Asking price is $350,000.00 USD or best offer. It is located in the United States. Pictures are available upon request. This unit has been stored inside a warehouse; it is in brand new condition, never used. Dresser-Rand C-VIP Compressor Model: 5C-VIP2 Cylinder Size: 12.50” Stroke: 5” Number of Cylinders: 2 Nominal rated: 1200 HP Max. Rod Load: 33,000 LB Rated RPM: 1,500 Rated Discharge: 450 PSIG Max. Pressure: 495 PSIG Hydro Test: 743 PSIG Max. Allow Discharge Gas Temp: 350’ F www.turbinepowerinternational.com ===================== EQUIPMENT LISTING HERE ======================== We have available for immediate sale Woodward NetCon 5000 Phase A Control Systems that came off P&W FT8 power packages, eight (8) complete sets of chassis (System 8260-296) and all 15 cards and eight (8) complete Power Supply (5439-800) Chassis which has 1 Power in and 4 Power out, twenty (20) 1 amp Solid State Interface panels, twenty four (24) Final Drivers, all in excellent used condition ready to ship from Miami FOB your FedEx #. Item are being sold as is without warranty. If you desire the cards can be run through Woodward's repair TAR, where they would test and re-certify that the card is working properly, and if needed they can repair any Woodward card, and we can arrange that with you for additional charges. Theses are interchangeable cards for NetCon 5000 control (Phase A Netcon's) and please check the P/N. My S/N's of all my cards are listed and will be on all paperwork. Pictures and an excel spread sheet with all part numbers and serial numbers are available. www.turbinepowerinternational.com ===================== EQUIPMENT LISTING HERE ======================== We also have two GG8 engines and two PT8 free turbines that have damage at the Pratt & Whitney Power System shop in Connecticut, and no longer needs this equipment for his operations and we have an exclusive sales agreement to liquidate this equipment. This equipment has about 11,500-12,000 operating hours on it since new.
The PT8 CCW, S/N 80015, has enough serious damage that very few items from that piece are of any value to anyone. The PT8 CW, S/N 80017, has very little damage to worry about from this visual inspection, but the labor and materials to clean and reassemble with (3) new bearings and seals is estimated to cost $200,000 +/-. The GG8, S/N 726404, has serious damage from the HPC compressor failure, and that I would say is not worth spending any money on. The LPC/IGV front compressor has some minor secondary damage from the metal flying around from the HPC compressor failure on it's last stages, but I don't think it's real bad. The engine from the HPC intermediate case aft is junk. The GG8, S/N 726412, doesn't have much damage as I see it in modules. This is the engine I feel can be repaired, but 1st it has to be completely disassembled, cleaned, and items that are of concern be repaired and/or replaced, 1st using items from S/N 726404, if they are not suitable, then serviceable or new parts from PWPS. This engine will be repaired by PWPS but it won't be a zero timed engine. They will address all issues as they go through the disassembly and re assembly, giving the best engine possible based on what they see. They will clearly address issues and all the repairs and workmanship will have PWPS warranty. There are numerous service bulletins that may be needed and that list with costs is being compiled now. Should these service bulletins be done, PWPS will want a P.O. to accomplish them. The idea here is to sell all four (4) assets, as is where is, and the new buyer can either repair the assets that they would like, there with PWPS or remove the assets and do whatever they want with the assets when they want. We are asking $2,000,000 for everything. The other idea is that three assets will be given to PWPS (title of ownership transferred) in exchange for the fully repaired engine S/N 726412 with gearbox, not zero timed, but a very healthy engine that can be used for anyone's spare or main engine, and if a new owner is involved early enough, they can be involved in the engine repair, and if so desired can have any additional work done by issuing PWPS a P.O. covering that work. They would take delivery of that engine directly from PWPS and we would transfer title of that engine to the new owner upon receipt of the EFT. We are asking for $2,000,000. I have photos of all the equipment taken this week and I can answer most questions by email or a phone call. Jorge E. Milian 1085 East 31st Street Hialeah, Florida 33013 U.S.A. Tel: (305) 285-4800 Fax: (305) 836-6698 E-mail: [EMAIL PROTECTED] Web Site:www.turbinepowerinternational.com This e-mail is intended for the use of the addressee(s) only and may contain privileged, confidential, or proprietary information that is exempt from disclosure under law. If you have received this message in error, please inform us promptly by reply e-mail, then delete the e-mail and destroy any printed copy. Thank you. _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "[EMAIL PROTECTED]"
