Hi, On Sat, Mar 13, 2010 at 1:48 PM, Robert Noland <rnol...@freebsd.org> wrote:
> > Ok, now that agp seems to be working... I have created a port for the > 2.9.1 version of the Intel driver. You will need to uninstall the > existing intel driver and install this one. You still won't have drm, > but should be a good bit better than vesa... > > http://people.freebsd.org/~rnoland/xf86-video-intel29.tar.gz<http://people.freebsd.org/%7Ernoland/xf86-video-intel29.tar.gz> > > Please let me know how it goes. You will likely want to use UXA > acceleration with this driver. > deinstalledc the old intel driver, installed the new, and tried 'startx' as root. Well, it didn't work. From /var/log/Xorg.0.log: (II) Module "ramdac" already built-in drmOpenDevice: node name is /dev/dri/card0 Failed to change owner or group for file /dev/dri! 2: No such file or directory Failed to change owner or group for file /dev/dri/card0! 2: No such file or directory drmOpenDevice: open result is -1, (No such file or directory) Failed to change owner or group for file /dev/dri/card0! 2: No such file or directory drmOpenDevice: open result is -1, (No such file or directory) drmOpenDevice: Open failed [drm] failed to load kernel module "i915" (EE) intel(0): [drm] Failed to open DRM device for pci:0000:00:02.0: File exists (EE) intel(0): Failed to become DRM master. (**) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) Clarkdale (--) intel(0): Chipset: "Clarkdale" (--) intel(0): Linear framebuffer at 0xD0000000 (--) intel(0): IO registers at addr 0xFB800000 size 4194304 (II) intel(0): No SDVO device is found in VBT (II) intel(0): 2 display pipes available. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA using monitor section Monitor0 (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear (II) intel(0): Output VGA disconnected (WW) intel(0): No outputs definitely connected, trying again... (II) intel(0): Output VGA disconnected (WW) intel(0): Unable to find initial modes (EE) intel(0): No valid modes. (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear (II) UnloadModule: "intel" (II) UnloadModule: "vgahw" (II) Unloading /usr/local/lib/xorg/modules/libvgahw.so (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found HTH -- Regards, Torfinn Ingolfsen _______________________________________________ freebsd-ports@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"