-----Original Message----- From: Thomas Spreng <[EMAIL PROTECTED]> To: "J. Foobar" <[EMAIL PROTECTED]> Date: Thu, 17 Oct 2002 13:27:30 +0200 Subject: Re: X problems, please advise helpless newbie
On Thu, Oct 17, 2002 at 01:24:43AM -0700, J. Foobar wrote: > I have been unable to get X to start successfully. > Hopefully I am overlooking something stupid. > > FreeBSD 4.6.2 on an Intel machine > > My graphics card is an Intel 82845G/GL. I searched > for info on the Intel site and it mentioned that this > card is in the i810 class. > > >From my XF86Config file: > Section "Device" > Identifier "Card0" > Driver "i810" > Chipset "i810" > Card "Intel i810" > End Section > > I have added the agp_load="YES" line to > /boot/loader.conf and /dev/agpgart exists. > > 'startx' returns the following: > > -------------------------------- > (EE) GARTInit: Unable to open /dev/agpgart (Device not > configured) > (EE) I810(0): AGP GART support is not available. Make > sure your kernel has agpgart support or that the > agpgart kernel module is loaded. > (EE) Screen(s) found, but none have a usable > configuration. > > Fatal server error: > no screens found > have you checked for agpgard support in your kernel as mentioned above in the startx output? ************************************************** ************************************************** Add the following to your kernel - device agp You can add some comments if you like - # Video device agp #Graphics card Then recompile your kernel. If it still doesn't work, I guess something else is borked. I usually have my best success configuring X using the old-fashioned xf86config command and working through the subsequent question-and-answer. Jud To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message
