Hello, On 4.7-RELEASE, I'm recompiling my kernel and these two drivers won't go away. These devices are not included in my kernel file.
Contents of my kernel file: machine i386 cpu I686_CPU ident SMP options CPU_ENABLE_SSE #Enable SSE/MMX2 options CPU_SUSP_HLT maxusers 256 # allow ((20+16) * maxusers) processes options DFLDSIZ="(128*1024*1024)" options MAXDSIZ="(256*1024*1024)" options MAXSSIZ="(256*1024*1024)" options QUOTA options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options UFS_DIRHASH #Improve performance on big directories options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SMBFS #SMB/CIFS Filesystem options SYSVSHM #SYSV-style shared memory options SYSVSEM #SYSV-style semaphores options SYSVMSG #SYSV-style message queues options SHMMAXPGS=65536 options SEMMNI=40 options SEMMNS=240 options SEMMNU=120 options SEMUME=40 options P1003_1B #Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options _KPOSIX_PRIORITY_SCHEDULING # Needed for WINE options USER_LDT #allow user-level control of i386 ldt # To make an SMP kernel, the next two are needed options SMP # Symmetric MultiProcessor Kernel options APIC_IO # Symmetric (APIC) I/O device isa #device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 #device fd1 at fdc0 drive 1 # ATA and ATAPI devices #device ata0 at isa? port IO_WD1 irq 14 #device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives #device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 # AGP GART support device agp device vga0 at isa? # splash screen/screen saver #pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 options SC_DISABLE_REBOOT # disable reboot key sequence # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? flags 0x20 # Advanced Power Management # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer #device plip # TCP/IP over parallel #device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! #device lnc0 # AMD PCNet device miibus # MII bus support device xl # 3Com 3C90x # Pseudo devices - the number indicates how many units to allocate. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device gif # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) #pseudo-device md # Memory "disks" # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # SMB/CIFS Requester (Requires LIBMCHAIN & LIBICONV) options NETSMB options NETSMBCRYPTO options LIBMCHAIN options LIBICONV # IP stuff options IPFIREWALL options IPDIVERT options IPFIREWALL_VERBOSE options IPFIREWALL_DEFAULT_TO_ACCEPT options IPFIREWALL_VERBOSE_LIMIT=10 options IPSTEALTH options RANDOM_IP_ID options NETGRAPH options DUMMYNET options ICMP_BANDLIM #Rate limit bad replies #options BRIDGE # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) device ugen # Generic #device uhid # "Human Interface Devices" #device ukbd # Keyboard #device ulpt # Printer #device umass # Disks/Mass storage - Requires scbus and da #device ums # Mouse #device uscanner # Scanners #device urio # Diamond Rio MP3 Player # Sound device pcm # PnP/PCI Sound Cards To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message
