On Monday 28 March 2005 20:25, Edwin Mons wrote: > On Mon, 28 Mar 2005 20:20:50 +0200, Edwin Mons wrote: > > I'm trying to enable DRI on my IBM ThinkPad A20m, which has an ATI > > Rage Mobility P/M AGP 2x rev 100 GPU onboard. I succesfully > > installed the mach64 DRM module, which shows the following lines in> > my > > dmesg: > > > > drm0: <Rage Mobility P/M AGP 2X> port 0x2000-0x20ff mem > > 0xf4200000-0xf4200fff,0xf5000000-0xf5ffffff irq 11 at device 0.0 on > > pci1 > > info: [drm] AGP at 0xf8000000 64MB > > info: [drm] Initialized mach64 1.0.0 20020904 on minor 0 > > > > However, when I start X.org 6.8.2, it doesn't show anything about > > DRM in the logfiles (attached). glxinfo reports it doesn't use > > Direct Rendering as well. > > > > Attached is my xorg.conf, as well. > > > > My questions: 1) does anybody know if it is possible to have DRI on > > this configuration at all, and 2) how does one get it to work?
from kernel LINT file # DRM options: # mgadrm: AGP Matrox G200, G400, G450, G550 # tdfxdrm: 3dfx Voodoo 3/4/5 and Banshee # r128drm: ATI Rage 128 # radeondrm: ATI Radeon up to 9000/9100 # DRM_DEBUG: include debug printfs, very slow # # mga requires AGP in the kernel, and it is recommended # for AGP r128 and radeon cards. device mgadrm device "r128drm" device radeondrm device tdfxdrm options DRM_DEBUG You may need to add the "device mgadrm" Hope it helps. _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
