Alle 16:52, giovedì 28 aprile 2005, Roland Smith ha scritto: > On Thu, Apr 28, 2005 at 06:35:57PM +0000, Vittorio wrote: > > Under FreeBSD 5.4 In my laptop I have the following item in usbd.conf to > > mount a usb-mass storage: > > > > device "SWISSBIT" > > vendor 0x1370 > > product 0x2168 > > devname "umass0" > > attach "/sbin/mount_msdosfs /dev/da0 /mnt/swissbit" > > > > > > When I insert the device this are the messages: > > > > > > fbsd# usbd -v -d > > usbd: opened /dev/usb0 > > usbd: opened /dev/usb1 > > usbd: reading configuration file /etc/usbd.conf > > usbd: opened /dev/usb > > usbd: device-attach event at 1114704239.430921000, Twist, SWISSBIT: > > vndr=0x1370 prdct=0x2168 rlse=0x0200 clss=0x0000 subclss=0x0000 > > prtcl=0x0000 device names: umass0 > > usbd: Found action 'SWISSBIT' for Twist, SWISSBIT at umass0 > > usbd: Executing '/sbin/mount_msdosfs /dev/da0 /mnt/swissbit' > > mount_msdosfs: /dev/da0: No such file or directory > > usbd: '/sbin/mount_msdosfs /dev/da0 /mnt/swissbit' returned 71 > > It takes a while for the mapping from umass to da to be established. Try > adding '/bin/sleep 1; ' to the front of the attach command. > > Your usbd.conf relies on two assumptions that might not be true. The > umass0 device is not necessarily the swissbit device, and umass0 does > not automatically map to da0. > > Roland
Didn't know. I was misled by the fact that I saw my SWISSBIT mass storage mapped as umass[0-2]+ and ** acordingly ** da[0-2]+: 0 to 0, 1 to 1 and 2 to 2. By the way, there's another question relating to mapping. As I said to mount the SWISSBIT I use for instance "/sbin/mount_msdosfs /dev/da0 /mnt/swissbit" whilst to mount my Eutron usb mass storage mapped as umass0 -> da0 I have to issue: "/sbin/mount_msdosfs /dev/da0s1 /mnt/eutron" Why is that, I mean da0 -> da0s1? Vittorio _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"