I have a problem with very slow printing after replacing 4.1 instalation with new 5.4 instalation (clean install, not upgrade). The printer is HP 4L, and i use it with up to date CUPS (all packages + gimp-print). With both CUPS ang gimp-print drivers and default port settings the dokument printing speed is about 8k each 1 minute (acording to CUPS web interface). There are no error messages from the kernel. With hint.ppc.0.falgs="0x20" or "0x80" there is the same effect.
With hint.ppc.0.falgs="0x20", "0x40", "0x48" and "0x88" CUPS web interface shows taht first 32k are sent instantly. Then 'Interrupt storm detected on "irq5: lpt0"; throttling interrupt source' kernel error message apears and the rest of the document prints slow, as in the first example. I tried this with several standard and HP bidirectional cables. I also tried all possible BIOS settings for the port. The old 4.1 instalation prints without problems. _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
