On 6/29/05, Scott Neville <[EMAIL PROTECTED]> wrote: > Thanks for your help, the controler is listed on that page and uses the > ida(4) driver. I have tried a differnt cable (one that i tested on another > server) and that has made no change, I have changed the terminators which > have made no change either. As for jumpers I cant find any on the card but > as its a programmable card which is set to the manufacture defaults (which > work fine on my other server), I am assuming they are correct. I have just > tried removing every device leaving just 1 processor a floppy drive 1 scsi > drive plugged direct into the motherboard and one chip of ram and i still get > the same problem :( > > Many thanks for your time > > Scott Neville >
Yes... But what happens if you remove or disable the SCSI card.... Boot the system with a LiveCD such as knoppix with the SCSI card and without the SCSI card or disabled in the BIOS. You have to rule out a hardware problem first... if it works in Linux it's most like not a hardware problem.... _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
