Hi there,
I have a RAID1 with gmirror between ad6s1 and ad10s1:
Name Status Components
mirror/mirror_swap COMPLETE ad6s1
ad10s1
If I run bsdlabel on ad6s1 I get the 'partition c ' error:
--
# bsdlabel ad6s1
# /dev/ad6s1:
8 partitions:
# size offset fstype [fsize bsize bps/cpg]
a: 20964304 0 swap
c: 20964320 0 unused 0 0 # "raw" part,
don't edit
bsdlabel: partition c doesn't cover the whole unit!
bsdlabel: An incorrect partition c may cause problems for standard
system utilities
--
but if I do it on the mirror, it shows the *same* info, but no error:
# bsdlabel /dev/mirror/mirror_swap
# /dev/mirror/mirror_swap:
8 partitions:
# size offset fstype [fsize bsize bps/cpg]
a: 20964304 0 swap
c: 20964320 0 unused 0 0 # "raw" part,
don't edit
From fdisk
# fdisk -s ad6
/dev/ad6: 484521 cyl 16 hd 63 sec
Part Start Size Type Flags
1: 63 20964321 0xa5 0x00
2: 20964825 467426295 0xa5 0x00
# uname -rm
6.0-BETA3 amd64
I can see that it seems ad6s1c is actually 1 sector smaller than the
whole slice (20964320 vs 20964321 ). Other than that, the system is
working ok.
1) how serious is the problem?
2) Why doesn't it show the same error on the mirror? Is it because the
mirror is actually 1 sec smaller than the slices that make the mirror?
I tried to fix it via:
bsdlabel -R /dev/ad6s1 partition_mirror_swap.txt
but I get:
# bsdlabel -R /dev/ad6s1 partition_mirror_swap.txt
bsdlabel: Geom not found
which doesn't make sense as
a) I have mirrors running
b) geom_mirror is built into the kernel
# cat partition_mirror_swap.txt
# /dev/mirror/mirror_swap:
8 partitions:
# size offset fstype [fsize bsize bps/cpg]
a: 20964304 0 swap 0 0
c: 20964321 0 unused 0 0 # "raw" part,
don't edit
thanks in advance,
Beto
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
