Ok, so it doesn't look like anyone knows anything about how to access the
DIO pins on this MB.
Next question, How does one go about analysing the hardware to find out what
the io and interrupt addresses might be?
The only command I can find is the 'pciconf' cmd. What if the DIO ports are
hanging off the ISA bus?
Here is what the EPIA-PD motherboard reports as:-
# pciconf -lv
[EMAIL PROTECTED]:0:0: class=0x060000 card=0xaa011106 chip=0x31231106 rev=0x00
hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT8623 Apollo CLE266 CastleRock CPU to PCI Bridge'
class = bridge
subclass = HOST-PCI
[EMAIL PROTECTED]:1:0: class=0x060400 card=0x00000080 chip=0xb0911106 rev=0x00
hdr=0x01
vendor = 'VIA Technologies Inc'
device = 'VT8633 Apollo Pro 266 CPU to AGP Controller'
class = bridge
subclass = PCI-PCI
[EMAIL PROTECTED]:15:0: class=0x020000 card=0x01061106 chip=0x31061106 rev=0x8b
hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT6105M/LOM Rhine III PCI Fast Ethernet Controller'
class = network
subclass = ethernet
[EMAIL PROTECTED]:16:0: class=0x0c0300 card=0xaa011106 chip=0x30381106
rev=0x80 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
class = serial bus
subclass = USB
[EMAIL PROTECTED]:16:1: class=0x0c0300 card=0xaa011106 chip=0x30381106
rev=0x80 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
class = serial bus
subclass = USB
[EMAIL PROTECTED]:16:2: class=0x0c0300 card=0xaa011106 chip=0x30381106
rev=0x80 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
class = serial bus
subclass = USB
[EMAIL PROTECTED]:16:3: class=0x0c0320 card=0x31041106 chip=0x31041106
rev=0x82 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT6202 USB 2.0 Enhanced Host Controller'
class = serial bus
subclass = USB
[EMAIL PROTECTED]:17:0: class=0x060100 card=0xaa011106 chip=0x31771106
rev=0x00 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT8235 PCI to ISA Bridge'
class = bridge
subclass = PCI-ISA
[EMAIL PROTECTED]:17:1: class=0x01018a card=0xaa011106 chip=0x05711106
rev=0x06 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxx EIDE Controller (All VIA Chipsets)'
class = mass storage
subclass = ATA
[EMAIL PROTECTED]:17:5: class=0x040100 card=0xaa011106 chip=0x30591106
rev=0x50 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT8233/33A/8235/8237 AC97 Enhanced Audio Controller'
class = multimedia
subclass = audio
[EMAIL PROTECTED]:18:0: class=0x020000 card=0x01021106 chip=0x30651106 rev=0x74
hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT6102 Rhine II PCI Fast Ethernet Controller'
class = network
subclass = ethernet
[EMAIL PROTECTED]:0:0: class=0x030000 card=0x31221106 chip=0x31221106 rev=0x03
hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT8623 Apollo CLE266 CastleRock AGP 8X Controller'
class = display
subclass = VGA
Any other ideas on how to aproach this?
Cheers,
Paul Hamilton
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of
> Paul Hamilton
> Sent: Monday, 5 September 2005 4:17 PM
> To: freebsd-questions@freebsd.org
> Subject: Accessing the Digital IO pins on a VIA EPIA-PD motherboard
>
>
> Hi,
>
> Anyone know the interrupts and addresses of the 8 Digital IO
> pins of the EPIA-PD motherboard?
>
> Cheers,
>
> Paul Hamilton
>
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to
> "[EMAIL PROTECTED]"
>
>
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
