here it is: (from Sept 13th, it doesn't create another since that date) (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TT F/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (**) ModulePath set to "/usr/X11R6/lib/modules" (--) Chipset SIS630/730 found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xcfffe000 - 0xcfffffff (0x2000) MX[B]E [6] -1 0 0xcfffd000 - 0xcfffdfff (0x1000) MX[B]E [7] -1 0 0xcfffc000 - 0xcfffcfff (0x1000) MX[B]E [8] -1 0 0xcfff7000 - 0xcfff7fff (0x1000) MX[B]E [9] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]EO [10] -1 0 0xcfee0000 - 0xcfefffff (0x20000) MX[B](B) [11] -1 0 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B) [12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [14] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]E [15] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]E [16] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]E [17] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]E [18] -1 0 0x0000ff00 - 0x0000ffff (0x100) IX[B]E [19] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[B](B) (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xcfffe000 - 0xcfffffff (0x2000) MX[B]E [6] -1 0 0xcfffd000 - 0xcfffdfff (0x1000) MX[B]E [7] -1 0 0xcfffc000 - 0xcfffcfff (0x1000) MX[B]E [8] -1 0 0xcfff7000 - 0xcfff7fff (0x1000) MX[B]E [9] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]EO [10] -1 0 0xcfee0000 - 0xcfefffff (0x20000) MX[B](B) [11] -1 0 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B) [12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]E [18] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]E [19] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]E [20] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]E [21] -1 0 0x0000ff00 - 0x0000ffff (0x100) IX[B]E [22] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[B](B) [23] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [24] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.1.0 ABI class: X.Org Video Driver, version 0.7 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/libint10.a (II) Module int10: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (II) SIS(0): initializing int10 (==) SIS(0): Write-combining range (0xa0000,0x20000) was already clear (==) SIS(0): Write-combining range (0xc0000,0x40000) was already clear (II) SIS(0): Primary V_BIOS segment is: 0xc000 (==) SIS(0): Write-combining range (0x0,0x1000) was already clear (II) SIS(0): VESA BIOS detected (II) SIS(0): VESA VBE Version 3.0 (II) SIS(0): VESA VBE Total Mem: 8192 kB (II) SIS(0): VESA VBE OEM: SiS (II) SIS(0): VESA VBE OEM Software Rev: 1.0 (II) SIS(0): VESA VBE OEM Vendor: (II) SIS(0): VESA VBE OEM Product: (II) SIS(0): VESA VBE OEM Product Rev: (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="X.Org Foundation" compiled for 6.7.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (II) SIS(0): VESA VBE DDC supported (II) SIS(0): VESA VBE DDC Level 2 (II) SIS(0): VESA VBE DDC transfer in appr. 1 sec. (II) SIS(0): VESA VBE DDC read successfully (==) SIS(0): Write-combining range (0x0,0x1000) was already clear
Xorg detected your mouse at device /dev/sysmouse. Please check your config if the mouse is still not operational, as by default Xorg tries to autodetect the protocol. Your xorg.conf file is /root/xorg.conf.new To test the server, run 'X -xf86config /root/xorg.conf.new' On 9/19/05, Garrett Cooper <[EMAIL PROTECTED]> wrote: > > Guillermo Garcia-Rojas wrote: > > >On 9/15/05, Garrett Cooper <[EMAIL PROTECTED]> wrote: > > > > > >>On Sep 15, 2005, at 12:40 PM, Guillermo Garcia-Rojas wrote: > >> > >> > >> > >>>I'm using FreeBSD 6.0-BETA4 and I'm having some troubles with > >>>X.org <http://X.org> <http://X.org><http://X.org>xonfiguration, I have > a SiS 630/730 > >>> > >>> > >>video card and > >> > >> > >>>my mouse doesn't work on > >>>console. When I launch "startx" the screen goes blank and the machine > >>>reboots. > >>> > >>>This is my xorg.conf file. > >>> > >>> > >>>-- > >>>--- > >>>Guillermo García Rojas Covarrubias > >>>Director General > >>>SoloBSD > >>>http://SoloBSD.org > >>> > >>> > >>What does it say in the Xorg logfile? > >>-Garrett > >> > >> > > > > > > > >It doesn't log anything bad. I have Xorg.0.log from September 13th and it > >doesn't modify when I run "startx" > >At the end of the file it says that Xorg detected my mouse at > /dev/sysmouse > >and that my xorg.conf file is /root/xorg.conf.new etc. etc. > > > > > What are the last 10-20 lines that it says though? This may be key > to determining what the issue is with your X. > Also, what video hardware are you using? > -Garrett > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to " > [EMAIL PROTECTED]" > -- --- Guillermo García Rojas Covarrubias Director General SoloBSD http://SoloBSD.org _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"