At 10:07 PM -0800 12/12/02, Gary D Kline wrote:
I finally got a few hundred bucks to switch our small office over from hubs to switches. We only have about 12 computers on our network. I wound up buy D-Link switches from NewEgg, a 16 port, several 5's and several 8-port switches. All told it was around $350.Hi People, Before I (potentially) throw aay some bills, I thought I'd ask the hardware-savvy if there is any appreciable difference between makes of hubs.After 5 years I am getting ready to move up to a 10/100 RJ-45 hub. I've got a 5-port Linksys (always had good luckwith Linksys); thinking of buying an 8-port 10/100 Linksys for around $50. Would buying a non-name-brand clone do the same job?
As a test I created a 100 MB file. With the hubs in place it took 119 seconds to transfer that file from one BSD box to another on the network. After replacing the hubs with the switches it took 9 seconds to transfer the same file! With each test I transferred the file three times to check for variances, which there were none.
--Jim
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message
