Hi, After my old flashdrive broke down, I bought a new one and updated my machine to 6.0-STABLE (amd64).
The new flashdrive is not recognized when I plug it in. There is no reaction whatsoever from the usb subsystem. This is the flash drive in question: http://www.supermediastore.com/pqi-cool-drive-256mb-usb-20-usb-flash-drive.html I have uhci, usb, umass, scbus, pass and da built into the kernel; uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 21 at device 16.0 on p ci0 uhci0: [GIANT-LOCKED] usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 21 at device 16.1 on p ci0 uhci1: [GIANT-LOCKED] usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 21 at device 16.2 on p ci0 uhci2: [GIANT-LOCKED] usb2: <VIA 83C572 USB controller> on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 21 at device 16.3 on p ci0 uhci3: [GIANT-LOCKED] usb3: <VIA 83C572 USB controller> on uhci3 usb3: USB revision 1.0 uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered I do get a funny message about a device without a driver: pci0: <serial bus, USB> at device 16.4 (no driver attached) But I suspect that is the USB 2.0 device, which isn't recognized because I don't have ehci in my kernel. When I plug in a SDDR-31 CompactFlash card reader, everything works: umass0: SanDisk Corporation ImageMate CompactFlash USB, rev 1.10/0.09, addr 2 umass0: Get Max Lun not supported (STALLED) da0 at umass-sim0 bus 0 target 0 lun 0 da0: <SanDisk ImageMate II 1.30> Removable Direct Access SCSI-2 device da0: 1.000MB/s transfers da0: 61MB (125441 512 byte sectors: 64H 32S/T 61C) (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 1 ea 0 0 0 1 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): MEDIUM ERROR asc:0,0 (da0:umass-sim0:0:0:0): No additional sense information (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data) The messages notwithstanding, I can mount the CF card just fine. So I think the usb subsystem works fine. My precious flash drive (apacer) also worked without problems. Can anybody shed some light on this? Roland -- R.F.Smith (http://www.xs4all.nl/~rsmith/) Please send e-mail as plain text. public key: http://www.xs4all.nl/~rsmith/pubkey.txt
pgpmpT2hy5x8i.pgp
Description: PGP signature