> Steve, I have made good progress. It seems that the factory 
> shipped the sata drives on ports 3 and 4 of the sata 
> controller. Both drives where secondary slaves. While we both 
> know that really shouldnt matter when you build a logical 
> drive and tell the array controller what span to boot from. 
> But it looks like freebsd hiccups on it. I moved my sata 
> drives to ports 1 and 2 on the sata controller, rebuilt the 
> array, installed and booted off the array with no problems. 
> 
> My next issue with this controller is the performance -ick! 
> There is a blurb about its read perfomance on the intel web 
> site, Ill keep you posted. Good luck and let me kknow what 
> your drive configuration is. 

Thanks for the info! I'm going to Cc: the list now, in case someone else
is having issues.

My drives are 1 and 2 as well, as a matter of fact, I've tried them
everywhere. No matter what, after install, I get the blinking cursor.

I'm going to try to get a chance this aft to play around again, and I'll
let you know what I find. If it doesn't work, we can compare BIOS
settings.

Regards,

Steve

> 
> 
> > 
> > > Hi Steve, I saw your messages on the FreeBSD mailing list 
> archives. 
> > > I am doing some work for a client whom purchased an Intel 
> > > Se7221bk1-e with one of these embedded ICH6-R raid 
> controllers. Same 
> > > symptoms as you stated, install runs great but wont boot from 
> > > controller. If I boot from the installation media i can mount 
> > > /dev/rd0s1a. Just wondering if you made any progress with this 
> > > controller.
> > 
> > That's some fantastic advise...mount / after booting CD! 
> I'll try that.
> > 
> > Otherwise, no new updates.
> > 
> > i've been watching current, as this chipset doesn't appear 
> to be the 
> > only one with this problem.
> > 
> > Keep me posted!
> > 
> > Tks,
> > 
> > Steve
> > 
> > > Thanks!
> > > 
> > 
> 

_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to