Rebuilt my system last night from 5.4-RELEASE p8 to 6.0-RELEASE. Went very smoothly, but I now have a problem with sync'ing my Palm Tungsten E.
The problem is that the ucom0 device entry doesn't appear when I press the hotsync button. I'm still loading the appropriate modules, this is the output of kldstat: Id Refs Address Size Name 1 12 0xc0400000 62f5c0 kernel 2 1 0xc0a30000 57c8 snd_ich.ko 3 2 0xc0a36000 1d408 sound.ko 4 2 0xc0a54000 32a8 ucom.ko 5 1 0xc0a58000 2cac uvisor.ko 6 1 0xc1a1d000 1b000 radeon.ko 7 1 0xc1a38000 d000 drm.ko It seems to get seen properly, here's an extract from /var/log/messages: Nov 21 21:26:50 desktop kernel: ucom0: Palm, Inc. Palm Handheld, rev 1.00/1.00, addr 2 Nov 21 21:26:50 desktop kernel: ucom0: Palm, Inc. Palm Handheld, rev 1.00/1.00, addr 2 Nov 21 21:27:07 desktop kernel: ucom0: at uhub0 port 3 (addr 2) disconnected Nov 21 21:27:07 desktop kernel: All threads purged from cuaU0 Nov 21 21:27:07 desktop kernel: All threads purged from ttyU0 Nov 21 21:27:07 desktop kernel: ucom0: detached And it shows up correctly with usbdevs: Controller /dev/usb0: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), SiS(0x0000), rev 1.00 port 1 powered port 2 powered port 3 addr 2: full speed, power 2 mA, config 1, Palm Handheld(0x0060), Palm, Inc.(0x0830), rev 1.00 Controller /dev/usb1: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), SiS(0x0000), rev 1.00 port 1 powered port 2 addr 2: full speed, power 500 mA, config 1, ???(0x021e), vendor 0x055f(0x055f), rev 1.00 port 3 powered Controller /dev/usb2: addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), SiS(0x0000), rev 1.00 port 1 addr 2: high speed, power 196 mA, config 1, Generic STORAGE DEVICE USB Device(0x0012), Genesys(0x3538), rev 1.19 port 2 powered port 3 powered port 4 powered port 5 powered port 6 powered But no entry in /dev. The release note mentions that ucom was rewritten for 6.0. Does anyone know what the problem might be - this worked fine on 5.4? My kernel is GENERIC minus the uscanner entry, otherwise no changes. Google and a search of questions@ and mobile@ didn't turn up anything similar. Any help or advice appreciated. TIA Peter Harrison ********************************************************************** This document is strictly confidential and is intended only for use by the addressee. If you are not the intended recipient, any disclosure, copying, distribution or other action taken in reliance of the information contained in this e-mail is strictly prohibited. Any views expressed by the sender of this message are not necessarily those of the Department for Work and Pensions. If you have received this transmission in error, please use the reply function to tell us and then permanently delete what you have received. Please note: Incoming and outgoing e-mail messages are routinely monitored for compliance with our policy on the use of electronic communications. ********************************************************************** The original of this email was scanned for viruses by the Government Secure Intranet (GSi) virus scanning service supplied exclusively by Cable & Wireless in partnership with MessageLabs. On leaving the GSi this email was certified virus-free _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"