On Fri, 23 Dec 2005, Gary Kline wrote: > Thanks; this model is on my list. Do you have USB 2.0 > defined (uncommented) in your KERNEL config file (and thus > built into your kernel)?? I'm trying to figure out howto > create /dev/uscanner0.
I have the ehci device defined, but since I don't any USB 2 ports it probably doesn't matter. I'm running with a GENERIC conf for 6.0-STABLE with usb built-in. As I see it the uscanner device will probe the generic usbdevice and recognize the scanner and create a devfs entry. This happens for me when I plug it in. Somewhere around the 5.3-RELEASE it was necessary to modify /usr/src/sys/dev/usb/uscanner.c to include the LiDE 30 scanner. Perhaps it is interesting to see whether the scanner appears in `usbdevs -v` if you don't get a /dev/uscanner0. Mine shows as: port 2 addr 3: full speed, power 500 mA, config 1, CanoScan(0x220e), Canon(0x04a9), rev 1.00 -- Martin P. Hansen _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"