On 25 Dec 2005 at 2:59, Ariff Abdullah wrote: > On Sat, 24 Dec 2005 12:37:56 -0500 > "Dan Langille" <[EMAIL PROTECTED]> wrote: > > Gidday folks, > > > > I have an IPv6 routing problem within my LAN behind the gateway. > > > > I have an IPv6 tunnel supplied by Hurricane Electric. The tunnel is > > > > setup and working. From my gateway I can access various IPv6 > > websites (e.g http://www.kame.net). I have enabled rtadvd(8) on my > > gateway. For the netstat, ifconfig, etc, see [1]. > > > > >From a computer inside my gateway, I cannot ping anything, not even > > > > > the gateway. I suspect it's because the routing tables are not > > being set up on the gateway. I expected the system to do that > > automatically. I also expected fxp0 to get an IPv6 address out of > > this. Did I guess wrong? I suspect that if I can get fxp0 on the > > gateway, all will be well. If not, I think Ineed to set up static > > routes. > > Add a single 2001:470:1F00:1979::/64 address each for both fxp0/1. You > don't even need rtadv.conf :) > > rc.conf:- > ipv6_ifconfig_fxp0="2001:470:1F00:1979::1/64" > ipv6_ifconfig_fxp1="2001:470:1F00:1979::2/64"
Thanks. I wanted to run rtadvd for the boxes inside the LAN. That ensure they get an address in the right range (AFAIK). Now... I just have to find someone with services, such as cvsup, available only over IPv6.... But what I've been reading indicates that cvsup is not IPv6 aware. -- Dan Langille : http://www.langille.org/ BSDCan - The Technical BSD Conference - http://www.bsdcan.org/ _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"