In the last episode (Jan 16), Aaron Burruss said: > Anyone have any ideas here? > > On 1/13/06, Aaron Burruss <[EMAIL PROTECTED]> wrote: > > > > Hi there, > > > > I'm looking for some help on a problem I'm having with a new setup I've > > got... I'm running sparc64 6.0 and also have an external USB drive > > enclosure with a 250GB IDE drive in it. The drive is formatted as a BSD > > partition (formatting done on another box). > > > > I've got the following in my kernel: > > > > # USB support > > device uhci # UHCI PCI->USB interface > > device ohci # OHCI PCI->USB interface > > device usb # USB Bus (required) > > device ugen # Generic > > device uhid # "Human Interface Devices" > > device umass # Disks/Mass storage - Requires scbus and da > > > > I.m seeing this in dmesg: > > > > > > [EMAIL PROTECTED] dmesg |grep -i umass > > umass0: vendor 0x05e3 USB TO IDE, rev 2.00/0.33, addr 2 > > umass0: BBB reset failed, TIMEOUT > > umass0: BBB bulk-in clear stall failed, TIMEOUT > > umass0: BBB bulk-out clear stall failed, TIMEOUT > > umass0: BBB reset failed, TIMEOUT > > umass0: BBB bulk-in clear stall failed, TIMEOUT > > umass0: BBB bulk-out clear stall failed, TIMEOUT > > umass0: BBB reset failed, TIMEOUT > > umass0: BBB bulk-in clear stall failed, TIMEOUT > > umass0: BBB bulk-out clear stall failed, TIMEOUT > > umass0: BBB reset failed, TIMEOUT > > umass0: BBB bulk-in clear stall failed, TIMEOUT > > umass0: BBB bulk-out clear stall failed, TIMEOUT > > umass0: BBB reset failed, TIMEOUT > > umass0: BBB bulk-in clear stall failed, TIMEOUT > > umass0: BBB bulk-out clear stall failed, TIMEOUT > > [EMAIL PROTECTED] dmesg|grep -i usb > > ohci0: <Sun PCIO-2 USB controller> mem 0xe2000000-0xe2007fff at device > > 12.3 on pci1 > > usb0: OHCI version 1.0, legacy support > > usb0: <Sun PCIO-2 USB controller> on ohci0 > > usb0: USB revision 1.0 > > ohci1: <Sun PCIO-2 USB controller> mem 0xe5000000-0xe5007fff at device > > 5.3on pci1 > > usb1: OHCI version 1.0, legacy support > > usb1: <Sun PCIO-2 USB controller> on ohci1 > > usb1: USB revision 1.0 > > umass0: vendor 0x05e3 USB TO IDE, rev 2.00/0.33, addr 2 > > usbdevs shows: > > [EMAIL PROTECTED] usbdevs -v > Controller /dev/usb1: > addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), > (0x108e)(0x0000), rev 1.00 > port 1 addr 2: full speed, self powered, config 1, product 0x0702(0x0702), > vendor 0x05e3(0x05e3), rev 0.33 > port 2 powered > port 3 powered > port 4 powered
There's already a quirk entry for that vendor/product combo so someone has gotten it working.. Maybe a bug in the ohci driver when talking to Sun PCIO-2 hardware? -- Dan Nelson [EMAIL PROTECTED] _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"