On 2006-01-31 03:41, Jozef Baum <[EMAIL PROTECTED]> wrote: > Many thanks to everyone who answered my previous e-mail about this subject > on this list or by private e-mail. > > As some of you suggested, I have installed PC-BSD (http://www.pcbsd.com/). I > am sure a Unix guru would not like to install FreeBSD in this way, as it > doesn't offer many choices. But it is just wonderful for a Unix newbie like > me. At the end of the installation, the GUI, the cable Internet connection, > and even the sound system worked fine. Some configuration still needs to be > done (printing and German keyboard). But now at least I have a system I can > use right away to do some usefull work with, and to further explore. > > I will try to configure the printing myself before perhaps eventually asking > some specific questions about it here. > > I found an interesting explanation about the configuration of the German > keyboard, so if some other German speaking newbie asks about it: > > http://user.cs.tu-berlin.de/~eserte/FreeBSD/doc/umlaute/umlaute.html > > Giorgos Keramidas asked me: > > Can you explain *how* you configured your X11 desktop? > > Like explained in the handbook. First I created an xorg.conf.new > configuration skeleton file with > > # Xorg -configure > > Then I tested this configuration with > > # Xorg -config xorg.conf.new > > The result was a "Mode not supported" message on the display screen > until I found out the HorizSync and VertRefresh values to write in the > Section "Monitor" which were supported, and which were much narrower > than the hardware manufacturers specifications.
That's probably a bug in the configuration file generated by Xorg and, quite possibly, a bug in the Handbook section. Most modern monitors and video adapters work without any HorizSync or VertRefresh line in `xorg.conf'. This forces the X11 servers to query the hardware for the supported refresh ranges, and I've found that it tends to be much easier to get things right this way :) > The display adapter is an nVidia GeForce4 MX with integrated GPU (which uses > 64 MB of the system's 512 MB physical working memory). The LCD monitor is a > Proview 780. I'm using an ATI on the laptop used to type this message. The file /var/log/Xorg.0.log lists it as: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] The `xorg.conf' file has commented out entries for HorizSync and VertRefresh, but this doesn't keep things from working. Section "Monitor" Identifier "Monitor0" # Uncomment if you don't want to default to DDC: #HorizSync 31.5 - 79.0 #VertRefresh 50.0 - 70.0 EndSection You may find it easier to comment out these lines from xorg.conf, start X11 and then tune the best refresh ranges later, after you get things working fine :) _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"