Sparcs are a bit different. A sparc will boot from tape, CD-ROM, net,
floppy, hard drive, pretty much and device. However, you have to boot from
the right record or slice, etc on the media. Setting the boot device in
the prom won't guarantee a boot from that device, only that it will try
that device as the default.
Sparcs are fussy about what they will boot, you can try booting right from
the prom. If you have the ok prompt you can type
boot cdrom
You get more control in the prom's old mode where you can type
b sd(0,6,0)
to boot from a SCSI CD at id 6
As I said the sparcs are fussy, and may not boot if your cd is not burned
correctly (depending on what software you used to make the image.)
You can google for more information on booting the sparc, there are other
UNIX's that do boot on these, so I know it should be possible. You may
have to keep trying.
-Derek
At 09:41 AM 2/28/2006, Scott Einuis wrote:
Hi People,
I've been using FreeSBD for years on x386 machines, and just yesterday
someone gave me a Sun Blade (Ultra-Sparc III) machine with an external SCSI
CD-ROM. It has Solaris 8 pre-installed.
My questions are..
Should I keep Solaris 8 or install FreeBSD?
And
Since I tried to install FreeBSD already and failed, how do I get the Sun
Machine to boot from the CD I created for SPARC boot only?
I tried using the eeprom command and changing the boot device to "cdrom" and
and I also tried the init 0 thing however when I probe-scsi nothing comes
up.
Any help would be appreciated.
Thanks
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
