Hello I just purchased a new server and was installing FBSD.  It currently
has 2 internal harddrives which are working and mountable.  Additionally
there are 3 hotswappable hdds which are connected to a 3ware 9550sx-8LP raid
5/0 controller card.  Everything has been configured properly within the
controller's bios.  However, the controller is not detected during boot
time.

I found out that the 'twa' drivers should take care of this, and after
consulting the online manpages I saw...  however it said FreeBSD 7.0 below
at the bottom of the online manpage...

*HARDWARE* 
<http://www.freebsd.org/cgi/man.cgi?query=twa&sektion=4&manpath=FreeBSD+7.0-current#end>
     The *twa* driver supports the following SATA RAID controllers:

     *·*         AMCC's 3ware 9500S-4LP
     *·*         AMCC's 3ware 9500S-8
     *·*         AMCC's 3ware 9500S-8MI
     *·*         AMCC's 3ware 9500S-12
     *·*         AMCC's 3ware 9500S-12MI
     *·*         AMCC's 3ware 9500SX-4LP
     *·*         AMCC's 3ware 9500SX-8LP
     *·*         AMCC's 3ware 9500SX-12
     *·*         AMCC's 3ware 9500SX-12MI
     *·*         AMCC's 3ware 9500SX-16ML
     *·*         AMCC's 3ware 9550SX-4LP
     *·*         AMCC's 3ware 9550SX-8LP
     *·*         AMCC's 3ware 9550SX-12
     *·*         AMCC's 3ware 9550SX-12MI
     *·*         AMCC's 3ware 9550SX-16ML

The odd thing is that when I do man twa locally on the machine, this is all
I have on my list:

     o   AMCC's 3ware 9500S-4LP
     o   AMCC's 3ware 9500S-8
     o   AMCC's 3ware 9500S-8MI
     o   AMCC's 3ware 9500S-12
     o   AMCC's 3ware 9500S-12MI

Is this just what is supported for FreeBSD 6.0?

I tried loading the twa locally from the box and received the following
message:

kldload twa
module_register: module pci/twa already exists!
Module pci/twa failed to register: 17
kldload: can't load twa: File exists

kldunload twa
kldunload: can't find file twa: No such file or directory

uname -a

FreeBSD localhost.CASO 6.0-RELEASE FreeBSD 6.0-RELEASE #0: Thu Nov  3
09:36:13 UTC 2005
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC  i386


localhost# cat /var/run/dmesg.boot
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Thu Nov  3 09:36:13 UTC 2005
    [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <IntelR AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2792.06-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9

Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x4400<CNTX-ID,<b14>>
real memory  = 535691264 (510 MB)
avail memory = 514867200 (491 MB)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IntelR AWRDACPI> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 5 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0
pci_link6: <ACPI PCI Link LNK0> irq 0 on acpi0
pci_link7: <ACPI PCI Link LNK1> irq 9 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port
0xb000-0xb01f mem 0xf6000000-0xf601ffff irq 18 at device 1.0 on pci1
em0: Ethernet address: 00:30:48:87:be:ec
em0:  Speed:N/A  Duplex:N/A
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <mass storage, RAID> at device 1.0 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0xe100-0xe11f irq 16 at device
29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xe000-0xe01f irq 19 at device
29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <base peripheral> at device 29.4 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 29.5 (no driver
attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf6100000-0xf61003ff irq 23
at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <display, VGA> at device 9.0 (no driver attached)
em1: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port
0xd100-0xd13f mem 0xf5000000-0xf501ffff irq 19 at device 10.0 on pci3
em1: Ethernet address: 00:30:48:87:be:ed
em1:  Speed:N/A  Duplex:N/A
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 6300ESB UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel 6300ESB SATA150 controller> port
0xe200-0xe207,0xe300-0xe303,0xe400-0xe407,0xe500-0xe503,0xe600-0xe60f at
device 31.2 on pci0
atapci1: failed to enable memory mapping!
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 on
acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2792057296 Hz quality 800
Timecounters tick every 1.000 msec
acd0: DVDROM <SONY DVD-ROM DDU1615/FYS3> at ata0-master UDMA33
ad4: 157066MB <HDT722516DLA380 V43OA91A> at ata2-master SATA150
ad6: 157066MB <HDT722516DLA380 V43OA91A> at ata3-master SATA150
Trying to mount root from ufs:/dev/ad4s1a

I don't know what else to do, does anyone know how to get this recognized?
I've spent all morning trying to get this figured out :/.
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to