I've gotten a little bit further in trying to get the ICH8 (P965)
chipset on my new machine recognized.
This page is quite helpful: http://pci-ids.ucw.cz/iii/?i=8086
Using it, I added some code to ata-chipset.c to recognize the ICH8
SATA controllers and ehci_pci.c and uhci_pci.c to recognize the USB
The USB stuff appears to work flawlessly. The ATA stuff has one minor
atapci2: <Intel ICH8 SATA300 controller> port
0xc800-0xc80f irq 19 at device 31.5 on pci0
atapci2: failed to enable memory mapping!
ata7: <ATA channel 0> on atapci2
ata8: <ATA channel 1> on atapci2
I'm not sure what's up with the failure to memory-map, but since I
only have one drive connected (and it's not connected to this
particular instance), it's harmless at the moment.
I've moved my SATA drive from the JMicro RAID controller to one of
the ICH8 ports, and it appears to work.
I tried to add the HD audio chip to /sys/sound/pci/ich.c, but
unfortunately, all I get is an error that it cannot map its I/O space:
pcm0: <Intel ICH8 (82801H)> mem 0xfebf8000-0xfebfbfff irq 22 at
device 27.0 on pci0
pcm0: unable to map IO port space
device_attach: pcm0 attach returned 6
The P5B motherboard has a Realtek Ethernet controller. Realtek has a
FreeBSD driver for it: http://www.realtek.com.tw/downloads/
Perhaps their changes could be either rolled into -CURRENT or merged
back to RELENG_6?
Getting the SMB controller recognized would be next, so I could get
mbmon to work. I can't quite figure out which driver (if any) is
close enough a match to try adding the PCI ID.
Last, but not least, since I have ATA_STATIC_ID turned on, I need to
let the kernel know where the disk is every time I move it. The
problem is that my AT keyboard doesn't work at the mountroot prompt
for some odd reason. A USB keyboard plugged in early enough to be
probed does work, however. But for some unknown reason, having a USB
keyboard plugged in causes the system to boot in slow motion (this
appears to be a BIOS bug - and yes, I did disable legacy USB support.
No help). Anybody know what's up with that?
email@example.com mailing list
To unsubscribe, send any mail to "[EMAIL PROTECTED]"