Hey,

Today I got my hands on a Netgear WG311v3 and since there is no propper support for that card I decided to use nids, so I installed the ndis and if_ndis kernel modules, generated a new Kernel Module by using the WG311v3.INF and WG311v3XP.sys files; according to this thread: http://linuxcompatible.org/Netgear_WG311v3_WLAN_PCI_Card_with_Debian_Linux_Testing_t33271.html I should use those files. So far it worked, I loaded the module correctly and I had a ndis0. Allthough I had problems configuring the card correctly ( it wouldn't assosiate ). So I reloaded the module but this time it wouldn't attach my device correctly. This is what keeps happening:


[EMAIL PROTECTED] kldstat
Id Refs Address    Size     Name
1   12 0xc0400000 5cfe2c   kernel
2    1 0xc09d0000 7794     snd_emu10k1.ko
3    2 0xc09d8000 22b88    sound.ko
8    1 0xc0a76000 59b90    acpi.ko
9    2 0xc2cfd000 16000    linux.ko
10    1 0xc2ea7000 3000     daemon_saver.ko
11    1 0xc2ef8000 2000     rtc.ko
[EMAIL PROTECTED] kldload /boot/kernel/WG311v3XP_sys.ko

My dmesg shows this:

ndis0: <NETGEAR WG311v3 802.11g Wireless PCI Adapter> mem 0xfe1e0000-0xfe1effff,0xfe1d0000-0xfe1dffff irq 19 at device 10.0 on pci2
ndis0: NDIS API version: 5.1
ndis0: init handler failed
device_attach: ndis0 attach returned 6

these are the kernel modules loaded after loading WG311v3XP_sys :


[EMAIL PROTECTED] kldstat
Id Refs Address    Size     Name
1   20 0xc0400000 5cfe2c   kernel
2    1 0xc09d0000 7794     snd_emu10k1.ko
3    2 0xc09d8000 22b88    sound.ko
8    1 0xc0a76000 59b90    acpi.ko
9    2 0xc2cfd000 16000    linux.ko
10    1 0xc2ea7000 3000     daemon_saver.ko
11    1 0xc2ef8000 2000     rtc.ko
15    1 0xc310c000 47000    WG311v3XP_sys.ko
16    1 0xc30e8000 b000     if_ndis.ko
17    2 0xc376a000 13000    ndis.ko
18    1 0xc377d000 c000     pccard.ko
[EMAIL PROTECTED]


The only thing changed since the first time I loaded the module was I copied it to /boot/kernel and I added WG311v3XP_sys_load="YES" to /boot/loader.conf but those changes shouldn't have effect on not correctly loading it I think.

I also tried to use the WG311v3.sys file, but I get the same output in my dmesg as above.

Can anyone tell me why it won't load my module correctly anymore ? And what I should do to get it working again

Regards,


--
-Frank Staals


_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to