Hello, I am unable to get my Microtech USB XpressSCSI HD50 to work properly under FreeBSD 4.7-RELEASE.
I am running 4.7-RELEASE and the problem manifests itself with a custom kernel and GENERIC. When I plug the device into the USB port, kernel messages indicate that the device is recognized but is acting up: umass0: Microtech International, Inc. USB-SCSI-HD50, rev 1.00/1.00, addr 2 umass0: Get Max Lun not supported (STALLED) umass0: BBB reset failed, TIMEOUT umass0: BBB bulk-in clear stall failed, TIMEOUT umass0: BBB bulk-out clear stall failed, TIMEOUT umass0: BBB reset failed, TIMEOUT umass0: BBB bulk-in clear stall failed, TIMEOUT umass0: BBB bulk-out clear stall failed, TIMEOUT Can anybody shed any light on what the problem could be? I bought this device because the umass(4) man page says it's supported. The device works under windows 2000 on the same laptop. The custom kernel has da, ohci, uhci and usb compiled in. And my Sandisk ImageMate usb->compact flash reader works great (shows up as da0) so I know my system has the prerequisites for this device. Does anybody have one of these things working? Any help would be greatly appreciated? Thanks. -Josh -------- In God we trust...everything else we use X.509 --------- Joshua Malone, Systems Administrator Phone: 434-245-5300 x119 Tovaris: The Digital Identity Company Fax: 434-245-5301 www.tovaris.com [EMAIL PROTECTED] To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message