I've been going round and round here trying to simply read a USB thumb
drive.  I've searched many web sites, read the various messages on
this list, the Handbook and other sources, but nothing is very clear
to me at the moment.  I think I have bits and pieces, but haven't been
able to put together the puzzle yet, soooooo ...

So here is a clip of my dmesg text ...  Note: I haven't included the
whole dmesg output ... if need be, please advise.

Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980,
1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the
University of California. All rights reserved. FreeBSD 6.1-RELEASE #0:
Sun May  7 04:32:43 UTC 2006
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC Timecounter
"i8254" frequency 1193182 Hz quality 0 CPU: AMD-K6(tm) 3D processor
(501.14-MHz 586-class CPU) Origin = "AuthenticAMD"  Id = 0x58c
Stepping = 12
real memory  = 125763584 (119 MB)
avail memory = 113504256 (108 MB)
kbd1 at kbdmux0
K6-family MTRR support enabled (2 registers)
ACPI disabled by blacklist.  Contact your BIOS vendor.
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 5 Entries> on motherboard
pci0: <PCI bus> on pcib0
$PIR: No matching entry for 0.1.INTA
agp0: <SiS 530 host to AGP bridge> mem 0xe8000000-0xebffffff at device 0.0 on 
atapci0: <SiS 530 UDMA66 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 0.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <unknown> at device 1.1 (no driver attached)

  USB related stuff


ohci0: <SiS 5571 USB controller> mem 0xefffe000-0xefffefff irq 9 at device 1.2 
on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered


pcib1: <PCI-PCI bridge> at device 2.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
dc0: <Davicom DM9102 10/100BaseTX> port 0xda00-0xda7f mem 0xefffff80-0xefffffff 
irq 10 at device 11.0 on pci0
miibus0: <MII bus> on dc0
amphy0: <Am79C873 10/100 media interface> on miibus0
amphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: Ethernet address: 00:30:21:14:b4:4d
pci0: <multimedia, audio> at device 12.0 (no driver attached)


I see no references to umass and/or da0 which I have come across in my
readings. In the /dev file there are two devices, usb and usb0, so I
tried mounting each one of these devices separately, but had no luck.
Obviously I'm missing something here, so any reasonably detailed
pointers would be appreciated.

At the moment I'm not concerned with USB 2.0.  LOL!

Thanks in advance.

_______________________________________________ mailing list
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to