I still have the same problem as below, even when running 6.2-BETA2 from a FreeSBIE - cd. I wonder if this could have to do with badly supportet motherboard, ASUS P5B, since I dont see any temp-readings with sysctl. cpuTemp and MBTemp are displayed under bios-config.
Another "funny" thing, if I read disk-data with smartmontools, smartctl -a /dev/ad10 [irq19: re0 uhci3++] starts using a hole cpu for itself, and only a reboot helps. mvh > > I run 6.1-STABLE-200607 on my brand new box with > Intel Core 2 Duo E6600 2 x 2,40 GHz cpu (beautiful piece of machinery) > > I can use my dvd-devices with atapicd, but atapicam do not work. > > kldload atapicam causes an interrupt storm, I guess. > I tried to take out atapicd from the kernel after reading > http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/73675 > In fact, I removed ataraid atapifd atapist too, without any luck. > > Here is output from top -S a few seconds after kldload atapicam > > last pid: 600; load averages: 0.24, 0.24, 0.11 > up > 0+00:02:36 11:27:53 > 88 processes: 5 running, 64 sleeping, 19 waiting > CPU states: 0.0% user, 0.0% nice, 0.0% system, 43.8% interrupt, 56.2% idle > Mem: 22M Active, 9604K Inact, 28M Wired, 15M Buf, 1943M Free > Swap: 4070M Total, 4070M Free > > PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND > 11 root 1 171 52 0K 8K RUN 1 2:03 99.26% idle: cpu1 > 12 root 1 171 52 0K 8K RUN 0 1:54 62.26% idle: cpu0 > 22 root 1 -64 -183 0K 8K CPU0 0 0:09 36.41% irq16: > uhci0+ > 31 root 1 -68 -187 0K 8K WAIT 1 0:01 0.00% irq19: re0 > uhci3++ > > Could anyone point me in a direction too solve this, please? _______________________________________________ email@example.com mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"