At 9:15 PM -0500 10/21/06, David Kelly wrote:
Dell PowerEdge 400SC, 6.2-PRERELEASE (altho this is an old issue)
dmesg says:
acd0: DMA limited to UDMA33, controller found non-ATA66 cable
acd0: DVDR <LITE-ON DVDRW SOHW-1633S/BS0K> at ata1-master UDMA33
cd0: 33.000MB/s transfers
The controller is properly probed as,
"atapci0: <Intel ICH5 UDMA100 controller>"
This DVD isn't writing discs as fast as other brands on other machines
and OS's (such as MacOS X). Lite-On has a newer firmware that I have
not tried.
Well, first the obvious question: What kind of cable do you have it
hooked up with?
Assuming you have the right cable, make sure you have it connected
correctly. I had a problem like this once, and it turned out that I
had put the cable on backwards. I had connected the end of the cable
meant for the motherboard to the device (a disk, iirc), and visa-versa.
I switched the cable around, and then it worked fine. Of course, I
didn't discover this until after a few years, while I was in the
process of replacing that PC!
--
Garance Alistair Drosehn = [EMAIL PROTECTED]
Senior Systems Programmer or [EMAIL PROTECTED]
Rensselaer Polytechnic Institute or [EMAIL PROTECTED]
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"