> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:owner-freebsd-
> [EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
> Sent: Monday, 20 November 2006 12:08 AM
> To: email@example.com
> Subject: Xircom XE2000 card problem
> Asked this question a couple of days ago in freebsd-mobile, but
> haven't heard anything. I'm reposting here to, hopefully, a wider
> I have an Inspiron 7000 laptop I've set up as a FreeBSD server
> Version 6.1. I have a Xircom XE2000 ethernet card I'd like to use.
> It appears to be recognized by FreeBSD, but doesn't startup
> correctly. In searching I've seen references to it working with
> FreeBSD, but indicate it should use the xe driver.
> Here's what the dmesg says:
> ed1: <Xircom 10/100 Network PC Card> at port 0x100-0x10f iomem
> 0x88000000-0x88000fff irq 1
> 1 function 0 config 1 on pccard0
> device_attach: ed1 attach returned 6
> Looking at the hardware list it should be supported by the dc or xe
> drivers, but not the ed driver. Am I missing something easy, or is
> this card not reallyl supported at all?
If you have a closer look, it is using the ed (4):
ed1: <Xircom 10/100 Network PC Card> at port 0x100-0x10f iomem
Make sure you have the following devices compiled in your kernel:
... also, you might need:
Disclaimer. This e-mail is private and confidential. If you are not the
intended recipient, please advise us by return e-mail immediately, and delete
the e-mail and any attachments without using or disclosing the contents in any
way. The views expressed in this e-mail are those of the author, and do not
represent those of this company unless this is clearly indicated. You should
scan this e-mail and any attachments for viruses. This company accepts no
liability for any direct or indirect damage or loss resulting from the use of
any attachments to this e-mail.
firstname.lastname@example.org mailing list
To unsubscribe, send any mail to "[EMAIL PROTECTED]"