Hello,

Please try the 6.1 or 6.2-PRERELEASE. I doubt that the 6.0 does not support PerC 5/I driver. If you want 6.0, please copy the mfi.ko to /boot/kernel and load it as a kernel module as boot by adding to /boot/loader.conf something like:
mfi_load="YES".
Hope that this helps.

On Mon, 27 Nov 2006, Phan Quoc Cao wrote:

I installed FreeBSD 6.0 on PowerEdge 2950, so if I retry to boot, but RAID
PerC 5/I card not detected hard disk drives.

I had to use mfi.ko driver for PERC 5/I by Selected Load KLD thought floppy
included mfi.ko driver then the install process is normal, but after that I
reboot machine, the filsystem not received and announced the following:


Manual root filesystem specification:

<fstype>:<device>  Mount <device> using filesystem <fstype>

           e.g. ufs:/dev/da0s1a

  ?                  List valid disk boot devices

  <empty line>       Abort manual input

mountroot>

Who anyone can help me?

Thanks and best regards!






<http://609473.sigclick.mailinfo.com/sigclick/04020B02/05014E05/07014E04/422
26222.jpg>
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"


-----
With best regards,          |            The Power to Serve
Nguyen Tam Chinh            |          http://www.FreeBSD.org
Loc: sp.cs.msu.su           |
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
  • Help Me! Phan Quoc Cao
    • Re: Help Me! Nguyen Tam Chinh

Reply via email to