-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 David Stanford wrote: >> Incorrect. If you installed the filesystem on ad3s1, it should be: >> >> root (hd3,0,a) > > > Thank you, I stand corrected. Not sure what I was thinking there... :) > > Many people goof up GRUB by accident because it's numbering system is >> zero-based and linux-like to a certain extent, so /dev/hda in Linux >> translates to hd0 in GRUB, which is also ad0 in FreeBSD. > > > This now leads me to a thought: does Grub count only *existing* hard drives > on your system or does it count the hard drive channels on your system? In > this case, Karl says he has installed FreeBSD on ad3, which makes me think > he has installed on a second SATA drive (more likely that on a fourth hard > drive I would think), and FreeBSD has counted two IDE channels as ad0 and > ad1, and two SATA channels as ad2 and ad3. If this is the case, and Grub > counts only the *existing* drives on his system, then he would have to use > (hd1,0,a), no? This would also explain the "disk is not existing" error he > was recieving. > > I'd be interested in hearing thoughts (or facts ;) on this as I hate being > left confused... :) > > -David
Good question; not sure about that one, since the BIOS may or may not count the EIDE channels as 0 and 1, and the SATA as 2 and 3. Needless to say, this little numbering scheme with grub has become confusing, esp with the introduction of new technology (SATA) >.>. Not sure how numbering would work with SCSI either (something I should try sometime), because I don't know how the BIOS numbers drives with SCSI cards or SATA drives put into the mix. As an example, I'll use my Linux box (which has just EIDE drives in it): Filesystem (as basis for understanding what's going on): sprsd gcooper # fdisk -l Disk /dev/hda: 80.0 GB, 80000000000 bytes 16 heads, 63 sectors/track, 155009 cylinders Units = cylinders of 1008 * 512 = 516096 bytes Device Boot Start End Blocks Id System /dev/hda1 1 18601 9374872+ 83 Linux Partition 1 does not end on cylinder boundary. /dev/hda2 18602 20799 1107508+ 83 Linux Partition 2 does not end on cylinder boundary. /dev/hda3 * 20799 53311 16386300 7 HPFS/NTFS Partition 3 does not end on cylinder boundary. /dev/hda4 53311 155009 51255823+ 5 Extended Partition 4 does not end on cylinder boundary. /dev/hda5 53312 53427 58432+ 83 Linux /dev/hda6 53428 155009 51197328 83 Linux For determining what's what, he could just load up the grub shell and type in... grub> root (hd0,0) Filesystem type is reiserfs, partition type 0x83 Note that it says what the partition type is and so you have an idea of where you are and what's going on. Yet, GRUB's understanding is limited because it doesn't directly understand NTFS, and hence I think that's what the chainloader command is present when booting Windows since it passes the ball for loading the OS to NTLDR (although a more technical document could help tell why): grub> root (hd0,1) Filesystem type unknown, partition type 0x83 - -Garrett -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFFe1E+6CkrZkzMC68RAliBAJsHgkz/MlQ2tTHTvEkRZ4S64OWa6ACggsmu RgVBQbEE0IR74tInOPTX0RM= =Mch+ -----END PGP SIGNATURE----- _______________________________________________ firstname.lastname@example.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"