Hi! Sorry for the cross post, I'd love to know if I can get this working
or not.
Regards,
Palle
---------- Forwarded Message ----------
Date: tisdag, december 12, 2006 18.52.35 +0100
From: Palle Girgensohn <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: if_nfe on Asus M2N-SLI deluxe?
Hi!
Does anybody know if if_nfe should work on the above motherboard? I
snached the patch for FreeBSD-6.2 from
<http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html>
and
tried it. The kernel and ifconfig seems happy, but it does not work;
ifconfig reports "active" but ifconfig reports:
nfe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
ether 00:17:31:86:aa:31
media: Ethernet autoselect (none)
status: no carrier
nfe1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
inet6 fe80::217:31ff:fe86:b4c6%nfe1 prefixlen 64 scopeid 0x4
inet 192.168.1.191 netmask 0xffffff00 broadcast 192.168.1.255
ether 00:17:31:86:b4:c6
media: Ethernet autoselect (none)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64
scopeid 0x5 inet 127.0.0.1 netmask 0xff000000
The media part of nfe1 looks bad, eh?
Is it supposed to work? How can I help to get it working?
FreeBSD 6.2-stable, around RC1. Enclosed is a dmesg. Anything else
needed?
/Palle
---------- End Forwarded Message ----------
------------------------------------------------------------------------
Subject:
if_nfe on Asus M2N-SLI deluxe?
From:
Palle Girgensohn <[EMAIL PROTECTED]>
Date:
Tue, 12 Dec 2006 18:52:35 +0100
To:
[EMAIL PROTECTED]
To:
[EMAIL PROTECTED]
CC:
[EMAIL PROTECTED]
Hi!
Does anybody know if if_nfe should work on the above motherboard? I
snached the patch for FreeBSD-6.2 from
<http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html>
and
tried it. The kernel and ifconfig seems happy, but it does not work;
ifconfig reports "active" but ifconfig reports:
nfe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
ether 00:17:31:86:aa:31
media: Ethernet autoselect (none)
status: no carrier
nfe1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
inet6 fe80::217:31ff:fe86:b4c6%nfe1 prefixlen 64 scopeid
0x4 inet 192.168.1.191 netmask 0xffffff00 broadcast 192.168.1.255
ether 00:17:31:86:b4:c6
media: Ethernet autoselect (none)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64
scopeid 0x5 inet 127.0.0.1 netmask 0xff000000
The media part of nfe1 looks bad, eh?
Is it supposed to work? How can I help to get it working?
FreeBSD 6.2-stable, around RC1. Enclosed is a dmesg. Anything else
needed?
/Palle
------------------------------------------------------------------------
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-PRERELEASE #0: Wed Nov 29 11:57:06 CET 2006
[EMAIL PROTECTED]:/usr/obj/.a/banan/usr/src/sys/WORKSTATI
ON Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3500+ (2210.20-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x40ff2 Stepping = 2
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG
E,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow>
AMD Features2=0x1d<LAHF,<b2>,<b3>,CR8>
real memory = 2146369536 (2046 MB)
avail memory = 2091245568 (1994 MB)
ACPI APIC Table: <Nvidia AWRDACPI>
ioapic0 <Version 1.1> irqs 0-23 on motherboard
acpi0: <Nvidia AWRDACPI> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 21
at device 2.0 on pci0 ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff irq
22 at device 2.1 on pci0 ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
atapci0: <nVidia nForce MCP55 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at device 4.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce MCP55 SATA300 controller> port
0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f mem
0xfe02d000-0xfe02dfff irq 23 at device 5.0 on pci0 ata2: <ATA channel 0>
on atapci1
ata3: <ATA channel 1> on atapci1
atapci2: <nVidia nForce MCP55 SATA300 controller> port
0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0f mem
0xfe02c000-0xfe02cfff irq 20 at device 5.1 on pci0 ata4: <ATA channel 0>
on atapci2
ata5: <ATA channel 1> on atapci2
atapci3: <nVidia nForce MCP55 SATA300 controller> port
0xc800-0xc807,0xc400-0xc403,0xc000-0xc007,0xbc00-0xbc03,0xb800-0xb80f
mem 0xfe02b000-0xfe02bfff irq 21 at device 5.2 on pci0 ata6: <ATA
channel 0> on atapci3
ata7: <ATA channel 1> on atapci3
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
fxp0: <Intel 82558 Pro/100 Ethernet> port 0xac00-0xac1f mem
0xfdeff000-0xfdefffff,0xfdc00000-0xfdcfffff irq 16 at device 6.0 on pci1
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:a0:c9:ce:11:26
fwohci0: <Texas Instruments TSB43AB22/A> mem
0xfddff000-0xfddff7ff,0xfddf8000-0xfddfbfff irq 19 at device 11.0 on
pci1
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:11:d8:00:00:c8:2b:85
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:11:d8:c8:2b:85
fwe0: Ethernet address: 02:11:d8:c8:2b:85
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci0: <multimedia> at device 6.1 (no driver attached)
nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xb400-0xb407 mem
0xfe02a000-0xfe02afff,0xfe029000-0xfe0290ff,0xfe028000-0xfe02800f irq 23
at device 8.0 on pci0 miibus1: <MII bus> on nfe0
e1000phy0: <Marvell 88E1116 Gigabit PHY> on miibus1
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseTX-FDX, auto nfe0: Ethernet address: 00:17:31:86:aa:31
nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xb000-0xb007 mem
0xfe027000-0xfe027fff,0xfe026000-0xfe0260ff,0xfe025000-0xfe02500f irq 20
at device 9.0 on pci0 miibus2: <MII bus> on nfe1
e1000phy1: <Marvell 88E1116 Gigabit PHY> on miibus2
e1000phy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseTX-FDX, auto nfe1: Ethernet address: 00:17:31:86:b4:c6
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci6: <ACPI PCI bus> on pcib6
atapci4: <JMicron JMB363 SATA300 controller> port
0x9c00-0x9c07,0x9800-0x9803,0x9400-0x9407,0x9000-0x9003,0x8c00-0x8c0f
mem 0xfdafe000-0xfdafffff irq 16 at device 0.0 on pci6 atapci4: AHCI
Version 01.00 controller with 2 ports detected
ata8: <ATA channel 0> on atapci4
ata9: <ATA channel 1> on atapci4
ata10: <ATA channel 2> on atapci4
pcib7: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pci7: <ACPI PCI bus> on pcib7
nvidia0: <GeForce 6200 TurboCache(TM)> mem
0xfa000000-0xfaffffff,0xe0000000-0xefffffff,0xfb000000-0xfbffffff irq 16
at device 0.0 on pci7 nvidia0: [GIANT-LOCKED]
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0 fdc0: [FAST]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0 sio0: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd3fff,0xd4000-0xd67ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
ukbd0: Logitech HID compliant keyboard, rev 1.10/1.80, addr 2, iclass
3/1
kbd1 at ukbd0
uhid0: Logitech HID compliant keyboard, rev 1.10/1.80, addr 2, iclass
3/1
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/18.00, addr 3, iclass
3/1
ums0: 6 buttons and Z dir.
Timecounter "TSC" frequency 2210201999 Hz quality 800
Timecounters tick every 0.801 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding
disabled, default to accept, logging disabled ad0: 152627MB <Seagate
ST3160212A 3.AAJ> at ata0-master UDMA100 acd0: DVDR <Optiarc DVD RW
AD-5170A/1.11> at ata0-slave UDMA66
cd0 at ata0 bus 0 target 1 lun 0
cd0: <Optiarc DVD RW AD-5170A 1.11> Removable CD-ROM SCSI-0 device
cd0: 66.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad0s1a
------------------------------------------------------------------------
_______________________________________________
freebsd-hardware@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
To unsubscribe, send any mail to
"[EMAIL PROTECTED]"
