Sorry about that last subject line, gents. Shouldn't have blindly forwarded it. Rest of message identical.
Steve On 2/4/07, Steve Franks <[EMAIL PROTECTED]> wrote:
On 2/4/07, Søren Schmidt <[EMAIL PROTECTED]> wrote: > Steve Franks wrote: > > Soren, > > > > I was instructed to forward this information to you by Ted > > Mittelstaedt on the freebsd-questions list. I see the M5287 listed in > > "man ata" but it doesn't work on my system. I found several other > > emails with identical info from novemeber on the freebsd-stable list, > > also unresolved. Those were for 6.2-RC2. Was working fine under > > 6.1-release. dmesg output is below in the forward. > Somewhere along the lines AHCI support for the 5287 was added, that is > probably the problem. It might be nessesary to enable AHCI in the BIOS > if possible. > Otherwise a way to tell when this is actually working on the HW is > needed as its clearly not enough that the BIOS says the resources are > there.... > > -Søren > > > > Thanks, > > Steve > > > > ---------- Forwarded message ---------- > > From: Steve Franks <[EMAIL PROTECTED]> > > Date: Feb 2, 2007 11:43 AM > > Subject: Help! Sata controller reset failure after 6.2 upgrade! > > To: FreeBSD Users Questions <email@example.com> > > > > > > Everything looks spiffy after my upgrade except all my sata disks are > > gone. Thank goodness the os in on a pata controller: > > > > atapci1: <AcerLabs M5287 SATA150 controller> port > > 0xec00-0xec0f,0xe880-0xe887,0xe800-0xe80f,0xe480-0xe487,0xe400-0xe41f > > mem 0xdffff800-0xdffffbff irq 21 at device 31.1 on pci0 > > atapci1: AHCI controller reset failure > > device_attach: atapci1 attach returned 6 > > > > So, I booted the 6.2 iso to find identical behavior, so it is not my > > mistake in the upgrade process (unless the mistake was to upgrade at > > all). > > > > Thanks, > > Steve > > > > > > Soren, I don't see any AHCI settings anywhere in my bios or in my sata raid controller page. It is the latest bios. Is there a way to force the driver to a standard ata device instead of ahci? Steve
Sorry about that last subject line, gents. Shouldn't have blindly forwarded it. Rest of message identical. Steve _______________________________________________ firstname.lastname@example.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"