In response to Olaf Greve <[EMAIL PROTECTED]>:
> Hi Bill,
> > I'm not seeing this. I tried this with PuTTY 0.58 on a fresh FreeBSD 6.2p1
> > system and had no problems. So I grabbed the latest PuTTY 0.59, and that
> > worked fine as well.
> > I haven't been following this thread, so I don't have any ideas on what
> > your problem might be, but it's certainly not FreeBSD or puTTY's fault
> > or I'd be seeing the same problem.
> Is this what you tried too, or did you use SSH2 (i.e. key
> authentication, instead of password authentication)?
The issue of ssh1 vs. ssh2 appears to already be clarified, so I won't
go into it again.
In my test scenario, I'm using password authentication. As I said, I
haven't really set anything else up yet, so the server has no authorized
keys or anything like that.
> In my case, SSHD is running in debug mode and the debug log clearly
> indicates that PuTTY only tries SSH2 and does not fall back to SSH1,
> whereas on my live box (FreeBSD 5.4 release AMD64, custom kernel), PuTTY
> does fall back to SSH1.
It shouldn't. That's odd, as there's no reason to use SSH1 with FreeBSD
5.4 -- SSH2 worked just fine in 5.X. I'd investigate your puTTY installation/
config, as it sounds to be corrupt.
I just remembered a problem a cohort had that sounds similar to this. It
was solved by deleting his puTTY config and starting over. It seems that
puTTY can somtimes corrupt its own config, at which point its behaviour
becomes very unpredictable. Never got around to investigating that in
any more detail, unfortunately.
> The 'lines' to the new server are about as short as they can be, as I'm
> currently setting the machine up over our local network, so the only
> thing in between the client and server is our router, which does not
> mess with the SSH traffic...
That's good. My concern was that this kind of experimenting can lock you
out of a machine, and I wanted you to be careful if you don't have ready
physical access to it. Read the docs on sshd's -d option and you'll
> In short: I see no reason why the PuTTY / FreeBSD 6.2 SSH combination
> would _not_ be at fault (especially as other SSH clients do work fine on
> this box, and as PuTTY also works when connecting to other boxes). :P
> Contrary to what I was thinking yesterday, I don't think my
> configuration is at fault...
Agreed. My only point is that default installs of both of these work
fine. Which seems to indicate that there's something different/odd/wrong
with _your_ setup.
First law of debugging: if you can't reproduce the problem, that means
it's isolated to the person/machine that can cause it. Have you tried
connecting to a different server with the puTTY in question? Have you
tried connecting to that sshd with a different puTTY installation?
> In case in such a situation the password authentication does work fine
> for you, I'd be curious to find out the reason why it doesn't work for
> me (perhaps you could then also post me your sshd_config settings).
You missed the part of my message where I pointed out that this is
a stock install. The sshd_config is identical to the one you would
get if you did a fresh install of FreeBSD.
> As mentioned, there is an easy work around by using a different SSH
> client, but PuTTY is handy for quick d/l-ing when abroad, and not having
> administrator's rights to the machine you're on at that time.
I agree. My point is that it _does_ work, and there is something amiss
with _your_ setup. The conclusion being that if you can find what's
amiss, yours will work as well.
Collaborative Fusion Inc.
firstname.lastname@example.org mailing list
To unsubscribe, send any mail to "[EMAIL PROTECTED]"